Hi to all maybe there's some one that still have the firmware for the PERC controller H740p mini 50.5.0-2819 or later, since in page of dell drivers is no longer available.
And I have a f/w is in fault state - MFI register state 0xF0010002
@ChepeSDsga I had to download the last revision SAS-RAID_Firmware_F3J22_WN64_51.16.0-4076_A16_01.EXE and update with that. Even after getting on the last revision I still get the same error you are receiving.
Hello, AmadorIII I don't seem to have enough information to figure out what your issue is in detail, unless you already resolved by replacing the PERC. If you still need help, let us know what you are going through. You can send us your service tag through https://www.dell.com/community/en/direct-messaging as well. Resepctfully,
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
ChepeSDsga
1 Rookie
•
4 Posts
•
2 Points
0
0
Posted June 9th, 2024 01:25
@DELL-Chris H Hi finally i buy a new PERC, reset the BIOS and finally started to work again.
Only is there any way to flash the PERC board because i really think is not burn It only has a broke firmware.
Thanks to all for the support.
Regards,