UNSOLVED

VinceBusMaximus

updated

22 years ago

0

3156

August 10th, 2004 20:00

PERC2 on PowerEdge 2450 - Can I hotswap these drives?

Two 36 gig SCSI drives attached to a PERC2 on PowerEdge 2450 - Can I hotswap these drives? They're configured in a RAID 1. One drive is bad (unforutunately, the first drive). I've got a fresh drive to use...but I can't even get the current bad drive to eject. I release the latch, the front comes out about an inch, but won't give any more.

Which leads me to this probably dumb question - are these even hot-swappable? I read something about powering down the disks - how do I do that and stay booted in the OS? If I shut down I'll likely have problems at rebooting and have to fool with boot.ini problems. I thought the point of hot swap was that I could yank out a bad drive and put in a new one and use the Dell RAID app to rebuild.

Help! Any advice greatly appreciated!
No Responses