UNSOLVED

MET-Sistemi

updated

9 years ago

0

2123

February 16th, 2018 08:00

PowerEdge T110 II - RAID1 status shows Optimal in console - degraded in OMSA

On a PE T110 II, the RAID controller configuration (accessed during boot) regularly shows RAID 1 status as Optimal.
OM Server Administrator reports both disks Online and ok, but the Virtual Disk is marked as permnently degraded.

Server Administrator is version 8.5, OS installed is Windows Server 2008 R2 Std Eng.

Thank you for tour help.
MT

  • Dell-JimmyP

    311 Posts

    1997

    0

    Posted February 16th, 2018 10:00

    Hi,

    Please send a private message with your service tag to ensure we have all appropriate information on your system.

    Thank you,

  • 1956

    0

    Posted February 19th, 2018 03:00

    Hi Jim,

    thank you for your reply. I'll send ST in private.

    Thanks

    MT

  • Dell-JimmyP

    311 Posts

    1938

    0

    Posted February 19th, 2018 10:00

    Hi Milena,

    I had forgotten that the H200 does not have a controller log. Sorry.

    As bad as it sounds, an unrecoverable disk media error usually bad. As matter of fact, they may correct themselves over time even being labeled unrecoverable. 

    Run consistency check and then send another log.

    Thanks, 

  • 1924

    0

    Posted February 20th, 2018 08:00

    Hi Jim,

    sorry but I can't see an option to run a consistency check on the virtual disk, can you please help me on how to run it?

    Thank you

    MT

     

  • 1889

    0

    Posted February 26th, 2018 02:00

    Hallo,
    we need to verify if the volume is ok (as reported in RAID BIOS console) or if it is really degraded (as reported in OMSA).
    Can you please help?
    Thank you
    MT

  • Dell-JimmyP

    311 Posts

    1855

    0

    Posted February 26th, 2018 08:00

     Hi,

    With a status difference in the controller and OMSA, the controller will take precedence. Make sure the firmware for the H200 and OMSA are up to date. For the controller Version: 07.03.06.00 ,A09.    For  OMSA Version: 9.1.0 ,A00.

    I was unable to find a screen shot for the consistency check to confirm, but you should be able to right click on the virtual and it should be listed as one of the options.

    Thank,