
UNSOLVED
Intel 10 Gigabit network to cisco LX4
Hello,
We are in the process of implementing a 10 Gigabit network for servers. We bought the following Hardware for this purpose.
Server PE- R710
Intel 10 Gigabit XFP SR Server Adapter, Optical, PCIe x8
10GbE SR SFP+ Transceiver for Intel X520 10GbE Dual Port Server
Adapter
Needs to connect with
Cisco-3750E switch
X2-10GB-LX4= 10GBASE-LX4 X2 Module
We are using SLES10SP3 and RHEL5.5
We use - ixgbe driver from Intel Website ixgbe-3.2.10
Initial issue was we don't see any link lights and also ethtool is not showing
speed/link etc for this NIC eth4 or eth5
For testing purpose we changed module to cisco 10GBASE-SR X2 module and
found that it is working fine and showing the speed: 10000Mb/sand the link detected as yes.
Now the question is, what cable we will need for the LX4 module to work?
I have multimode cable supplied by DELL distributor which is LC-SC 50/125, orange color cable, which is working fine for 10GBASE-SR X2 module and not for LX4 module. If anyone got details on this module please provide.
I am reading documentation about OM2, OM3, FDDI, MCP etc on cables but not sure which one will work for me.
Regards
Jestin Paul
Responses (1)
Solutions (0)

Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
242
0
Posted April 14th, 2011 08:00
You may want to ask Cisco support to find out what type of cable you should use. With 10Gbit equipment you usually want to follow the switch vendor's recommendations in regards to the SFPs and cables that you use.