UNSOLVED

old3

updated

24 years ago

O

old3

1 Message

0

66322

September 21st, 2002 05:00

How can I add a regular PCI sound card in 600SC?

Hi,

We just purchased this new PowerEdge 600SC and found that it came with a different kind of PCI slot (PCI-X? maybe) with the "key" in the slot close to the plate (opposite of the normal).

Just wondering how can we put a sound card in the box? We need a sound card for some programs.

Thank you very much.

John



Message Edited on 09/21/02 02:04AM by old3
  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    676

    0

    Posted September 21st, 2002 13:00

    Hi,

    The PCI slots in the PowerEdge 600 SC are all 3.3 volt slots which is the reason for being keyed differently.

    Dell does not officially support sound cards in PowerEdge Servers. However, if you can find a sound card compatible with the 3.3 volt PCI slots, it should work.

  • stonent

    2 Intern

    •

    823 Posts

    676

    0

    Posted September 21st, 2002 16:00




    The Creative Audigy card (top) has the second notch and should work.
    The Live card below does not.



  • jbrickey

    1 Message

    676

    0

    Posted October 17th, 2002 04:00

    I found 2 other sound cards that might work also.

    I have 5 of these machines and i am trying to get sound cards for all of them.

    One is the Turtle Beach Montego II (which i can get quite a few of these

    The other is the

    Diamond Multimedia Monster Sound mx300
     
  • 676

    0

    Posted November 6th, 2002 15:00

    Any luck on this? I'd like to get a sound card for my 600SC also.

    Is PCI 2.1 the same as 3.3v?
  • cooljaz

    6 Posts

    676

    0

    Posted November 14th, 2002 22:00

    Do you know for SURE that the Audigy card works for PowerEdge 600SC?
  • ande0581

    1 Message

    676

    0

    Posted December 2nd, 2002 01:00

    I have successfully installed an audigy in the computer in both the 64 and 32 bit slot. Installed perfect.
  • rgl

    1 Message

    676

    0

    Posted January 20th, 2003 18:00

    I have this SBLive 5.1 and it works with 600SC as well; Audigy is way too overkill for what I need.  There are many of these cards for auction on Ebay.  But be careful as not all SBLive are 3.3V compatible (look for the front gap near the connector end of the PCI card; my very first SBLive card does not)

     

  • gener1c

    3 Posts

    676

    0

    Posted March 25th, 2003 21:00

    All,

    I just purchased a 1600SC server for audio production and this thread has me worried! Can I install my special audio cards (Ensoniq EDS-1000) into this system. The documentation says these are 5v cards and I need space for three of them. They DO NOT HAVE the special little tooth at the front.....

    Does this thread only apply to the 600SC?

     

    Thanks,


    Aaron

     

  • JustaBill

    4 Posts

    676

    0

    Posted March 25th, 2003 21:00

    I also added the sound blaster live 5.1 card and it works like a champ.

    Anybody have any luck with the ATI All-In-Wonder VE card?

     

    Cheers,

    JustaBill

  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    495

    0

    Posted March 26th, 2003 19:00

    Hi Aaron,

    The PowerEdge 1600 SC does have 2, 32bit/33Mhz, 5 volt PCI slots (The PowerEdge 600 SC does not have any 5 volt slots).

    I cannot confirm if the Ensoniq card will work properly, but at least I can confirm it is compatible with the slot.

    Thanks for using the Dell Community Forums