can Dell PowerEdge R430 support SAS 2.4TB 10K compatible and raid configration
question
Dear All,
Currently our customer have 1 x Dell R430 server, and it has 4 x 1.2TB SAS 10k disk running with raid 5, and i would like to add 2 x SAS 2.4TB into this server, just wonder can i configure another raid 1 for these 2 new added HD in this server ? any help would be appreicated
Thats more a question of the used (RAID) HBA rather that the Disks. If its hardware Card than you can archive what you want. If its the software S130 controller, which i am not familar with you should take a look to the Docs.
Using the H330 or H7xx than its easy. We have a lot of PowerEdge with multiple Diskgroups.
i checked the datasheet, for edge R430 the raid controller is using the following, for the external HBA is already bundle ? may i know is these contoller supporting muti raid group ?
RAID controllers Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P External HBAs (RAID): PERC H830
In general, yes you can add more drives and create another disk RAID. As for compatibility, I am unsure. I've checked for Dell certified drives for 2.4TB, there are a few appeared. Yes, you can install 3rd party non-Dell drives, but I can't guarantee it would work. There are no bundled RAID controllers with the servers. It is configured per order. But again in general, yes you can add more drives.
Origin3k
6 Operator
•
2424 Posts
•
12408 Points
0
0
Posted October 16th, 2023 08:54
Thats more a question of the used (RAID) HBA rather that the Disks. If its hardware Card than you can archive what you want. If its the software S130 controller, which i am not familar with you should take a look to the Docs.
Using the H330 or H7xx than its easy. We have a lot of PowerEdge with multiple Diskgroups.
Take a look to the Series9: https://www.dell.com/support/kbdoc/de-de/000131648/list-of-poweredge-raid-controller-perc-types-for-dell-emc-systems?lang=en
Regards,
Joerg