UNSOLVED

Chris516

updated

1 year ago

C

Chris516

1 Rookie

•

28 Posts

•

2 Points

0

149

August 25th, 2025 20:51

Replacement of 180w PSU w/ a DELL Tech recommended 300w PSU in a Dell OptiPlex 7020 Tower Business Desktop Computer

I am trying to replace a 180w(standard) PSU w/ 300w PSU DELL techs said I should get.  In order to use Soundblasterx AE-5 soundcard.  While I have disconnected the two cables from the motherboard.  The second cable is also secured in a 'clip', that.  Is part of the case construction.

How can I do this?

The online graphic, in the online manual.  Says nothing about the clip.

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    1

    Posted August 25th, 2025 23:05

    yes Dell case has clip for cable management

    https://www.youtube.com/watch?v=JWzw_OmkywA

    bend the clip a little to extricate the cable

  • Chris516

    1 Rookie

    •

    28 Posts

    •

    2 Points

    0

    0

    Posted August 26th, 2025 02:40

    @redxps630​ The video didn't show anything to do w/ the PSU, BUT.  I took another look at the clip, and.  Was able to get out.

    (edited)

  • Chris516

    1 Rookie

    •

    28 Posts

    •

    2 Points

    0

    0

    Posted August 27th, 2025 04:22

    @redxps630​ I was able to get the 180w PSU out.  While I was able to put the 300w PSU in the case, and connect the 8-pin cable to the motherboard.

    The 180w was also connected to a 4-pin connection on the motherboard.  There is some 'device' attached(w/ two screws) to the motherboard, that.  Makes connecting the 300w to the 4-pin connector virtually impossible.  Is that 'device', a fan?  Also, Whatever it is, is it possible to remove it with taking out the screws?

    (edited)

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    0

    Posted August 27th, 2025 23:05

    300w psu is plugged in 8 pin and one or two 4 pin cpu sockets of motherboard depending on it is 7020 tower (one) or tower plus (two). you can tell the difference btn two tower by number of DIMM slots.  tower plus has 4. tower has 2.

    7010 tower video https://www.youtube.com/watch?v=UUrG8-NgSmk

    looks like 7020 tower.

    some 'device' attached(w/ two screws) to the motherboard, do you mean the ssd?  upload a pic if you can

    (edited)

  • Chris516

    1 Rookie

    •

    28 Posts

    •

    2 Points

    0

    0

    Posted August 28th, 2025 02:03

    @redxps630​ It is the Tower, not the Tower PLUS

    The 'device', is definitely not the SSD.  The 'device' is to the right of the 4-pin connector.  It goes from the motherboard, to the back of the case.  Is that the fan?  Can I remove it, just to attach the 4-pincable, then.  Re-attach it?

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    1

    Posted August 28th, 2025 02:34

    yes you can temporarily disconnect if that helps then reconnect

    pic confirms you have tower (not tower plus)

  • Chris516

    1 Rookie

    •

    28 Posts

    •

    2 Points

    0

    0

    Posted August 28th, 2025 02:52

    @redxps630​ Are the screws extra long?

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    0

    Posted August 28th, 2025 02:56

    not sure which screws in your pic.  I do not see a device attached w 2 screws in your pic.  can you annotate?  do you have an optional IO module at back of tower?

    (edited)

  • Chris516

    1 Rookie

    •

    28 Posts

    •

    2 Points

    0

    0

    Posted August 28th, 2025 04:50

    @redxps630​ The right screw is barely visible in the pic.  The left one is not visible in the pic.

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    0

    Posted August 28th, 2025 17:11

    upload a pic w arrow on the device/screw