UNSOLVED

tvrolyk

updated

23 years ago

T

tvrolyk

5 Posts

0

12272

April 1st, 2004 02:00

Inspiron 600m, Truemobile 1300 and D-Link DI-624 delayed disconnect and reconnect

I have had continuous problems with my 600m and Truemobile 1300 from the get go. After upgrading the firmware on my D-Link DI-624 to version 2.37 things got much better but I still have this persistent problem of wireless disconnect after about 3 minutes after bootup.

Every time after bootup I have a good wireless connection until about 3-5 minutes later when it just dies. If I wait long enough, maybe another 5-10 minutes it will reconnect. Or I can disable and re-enable the wireless adapter to get my connection back. From there forward the connection stays good until I restart and then it start all over again.

I am using a 600m which I purchased through the Dell Outlet. It originally came with the Intel 2100 and I replaced it with the 1300 mini-pci card. I am using the latest driver version 3.40.65.0 dated 2/17/04.

Because of other problems I just formated the HD and reinstalled everything but still am having this problem.

Any thought anyone?

Tony

  • lnelson15

    10 Posts

    254

    0

    Posted April 2nd, 2004 19:00

    Hey there,

    What security method are your using in the router and wireless device? None, WEP or WPA-PSK? I am having symptoms similar to yours when using the WPA-PSK with TKIP implemented. When using WEP this issue goes away and the initial connection holds up well.

     

  • tvrolyk

    5 Posts

    254

    0

    Posted April 4th, 2004 00:00

    I am also using WPA-PSK with TKIP. I am running a home business and have a server in the basement. Although the server has it's own seciruty setup, it does contain customer data that I don't want getting out.

    Given my neighborhood I doubt anyone around here would even have a wireless client to even detect the signal and there is probalby less chance that someone would be driving around here looking for a signal. But I am scitish about security so I want to use the most I can.

    So if this is unique to WPA-PSK with TKIP then I guess I could live with it but it should work without interruption in my opinion. I am sure large companies who implement wireless and similar security wouldn't put up with this kind of service interruption.

  • lnelson15

    10 Posts

    254

    0

    Posted April 4th, 2004 13:00

    Hey there,

    I am not sure if it is exactly the same in your case but it does sound very similar. You can implement WEP security with you TM 1300 wireless device and router and see if the initial connection drops out or holds like it should to verify your issue has to do with the WPA-PSK (TKIP) security implementation.

     

     

  • tvrolyk

    5 Posts

    254

    0

    Posted April 7th, 2004 01:00

    Thanks for the info. Unlike some, I consider Tech support my last resort. Since I have been a computer tech/Network admin for 5 years I can frequently fix problems faster without them. But I am still new to wireless and have exausted all other usefull sources I can think of.

    Tony

  • lnelson15

    10 Posts

    254

    0

    Posted April 7th, 2004 14:00

    Hey there,

    I have been doing network/desktop support/sysadmin work since the summer of 1994 so I understand what you are saying about making the call.;-) I have been digging around in this since I first got the laptop. I am just about ready to get a Netgear 108meg Super-G PCMCIA device that might fit my Netgear router better and double the speed. If I had know a little more when I first got this about the situation with standards changing (i.e WEP -> WPA-PSK), I probably would have looked harder at the device I did purchase from Dell. When it is connected, the setup I have is quite fast actually. I just don't want to have to mess with disabling/enabling the connectoid after the initial connection "stops" to get it going again. I suppose I could hang network monitor drivers on the wireless connection and the NIC in a W2K desktop which is on my LAN to see what I can find if anything.

     

    P.S. UPDATE...I found a resolution for the issue with mine and posted in another thread I have going concerning this type of issue. Look at the 04-08-2004 12:55 PM entry in the following thread link.

    http://forums.us.dell.com/supportforums/board/message?board.id=si_wireless&message.id=5632

    Message Edited by lnelson15 on 04-08-2004 01:54 PM

    Message Edited by lnelson15 on 04-08-2004 01:55 PM

    Message Edited by lnelson15 on 04-08-2004 01:56 PM