D600 + TM 1300 + Linksys Router | No connection/Dropping/Lack of Internet
At the moment, here is the issue, and it is unfortunate to see so many others with similar issues.
System Specs: Latitude D600 Truemobile 1300 Linksys Wireless Access Point Router BEFW11S4 Link Wireless Network Card PC Card 3.0 (Wireless Network Card)
- I can connect into my wireless network perfectly with WEP running through my old Linksys Wireless Network Card and also without WEP running. When connecting through this old card, the signal does not drop and it fine and great with full internet access.
- I cannot connect to my wireless network through my Dell TM 1300 regardless of various settings. However it does in the perferred networks setup window it does show the network there but not in the available network section.
- However, prior to applying an update found through a link in this forum involving a Windows patch, seemingly without changes somehow I ended up being able to be conected to my network but unable to get on the internet, and the dropping began like many have complained in the past.
- There is another network available in my building that I can connect too but cannot get on the internet with.
So basically, the most important thing is to find out 1) How to get my network to get into the available networks box not just the preferred so I can connect to it. 2) Stop the card/signal from dropping repeatedly (as I expect will since it did before when we randomly connected) 3) How to get access to the internet since even when connected through the TM 1300 and having excellent signal strength... it won't let me browse the internet. It is not returning DHCP ip.
IP Address: 192.168.1.1 (Device IP) 255.255.255.0 Wireless: Enabled SSID: Amber SSID Broadcast: Enabled Channal 4 WEP: Mandatory selected (and it is working with the linksys network card) Connection Type: PPPoE
From the "wireless" tab in the area:
Filmware VersionL 1.1.2 (yes it is updated) Beacon Interval: 10 RTS Threshold 2304 Fragmentation Threshold: 2304 DTIM Interval: 3
Basic Rates: 1-2-5.5-11 BMps (had to change from default cause the other was really slow) TX Rates: 1-2-5.5-11 MBps (default) Preable Type: Lon Preamble (default) Authentication Type: Both (default) Antenna Selection: Diversity Spread on
1. Make sure that the wireless card is enabled. With this system, the wireless card can be turned off in three ways. First is by using the Dell TrueMobile 1300 WLAN Utility, on the Wireless Networks tab in there, make sure that the box is checked for "Enable Radio". Also, Fn+F2 keys can also turn off the card (should see a radio antennae on the F2 key). Last, the card can be both disabled completely or turned off in the BIOS. Go to page 3 of the BIOS and make sure that the card is set to Enabled and the Radio is turned On. You'll also have an option about whether to use the Fn+F2 keys or the Utility to turn off the card.
2. Since you state that your router is set to channel 4, you can be receiving interference from another wireless network(s) on channel 1 through 8. Use the Site Monitor utility to see there are any other visible networks on those channels. Besides, don't put your wireless network on any other channels but 1, 6, or 11; that way there can be three non-overlapping wireless networks coexisting in your area. Also, get rid of any 2.4GHz phones or any other device that operates on that frequency. If you have a 2.4GHz phone, disconnect power to the base station of the phone completely, 802.11b/g networks mix with 2.4GHz phones like oil and water. If that doesn't help, try reseating the card.
3. Windows XP and the 1300 Utility only support the standard WEP encryption, not the PassPhrase used by Linksys routers. Use the HEX WEP key generated by your router and remove the check for "The key is provided for me automatically" in your Preferred Networks profile.
Pretz.. I was in the process of saying "I have the same problem". I noticed a few things.. even though I had updated the firmware for my router recently.. there was a more recent one. for my Linksys BEFW11S4 Ver 3.
I also noticed I was running a few inconsistent settings
Firmware Version: 1.45 (new)
DTIM Interval: (changed back to 1, was 3) (range: 1~65535, *1)
Basic Rates: 1-2
TX Rates: 1-2.....-11
Station MAC Filter: Enable ( this is better for security although can be spoofed, and is not required)
I had added the HEX MAC adddress of the TM 1300 card earlier.
When I viewed the Active MAC table from the router.. it gave this card the station 1 (something it wasnt doing prior to the Firmware upgrade)
Back at the router login "Setup" page
Wireless Enable
SSID: (something)
SSID Broadcast: Disable
Channel: 11
WEP: Mandatory
WAN Connection Type: Auto
Hope this helps!
I'm typing over the wireless connection right now!
Message Edited by C4pnCrunch on 01-22-2004 10:49 PM
Sorry for the confusion, it is the unique MAC address assigned to your network card. You do not have to use the MAC filter option it is just an additional security precaution for the Linksys Router Menu: ADVANCED >> WIRELESS >> Station MAC Filter:
If you disable this you will NOT have to enter the MAC address. so you should be good
When you get everything else working you can come back to this later.
When you are ready.. you can look in he Windows Control Panel >> Network >> Wireless Network Connection >> Support Tab Details If you cant find it do a "help" in Windows.
I have the same problem with my new D600 with the truemobile 1300 card. I have a C610 with the old truemobile card and it does not have this problem. My router is a Linksys BEFW11S4 V2. I started on channel 6 and it did not work at all, then I changed the channel to 11 and have been able to run it fairly well, but after a while the throughput drops to 1 Mbs, even though the signal does not degrade at all. Also I have turned off the QoS packet scheduler. I am not sure this did anything though.
I have a similar problem. The card will disconnect itself after awhile but the connection is slow. Some times google will come up and sometimes it wont. When I ping my AP for about a minute, it is about 40% I am surprised google came up at all. I tried a lot of configs. WEP, no WEP, and without 802.1x this is with my card 3 feet away from my AP. I have a linksys AP. However I have two other wireless cards cisco aironet 340, and a enterasys card. Both of these cards work with little config and with 100% for 1 minute pinging a dns server on the internet from the other room. LET ME REPEAT THAT LITTLE OR NO CONFIG, (but I turned off wep and MAC filtering which I would like to turn back on.) I realize that ping over wireless you will drop some packets. But 95% to 100% pinging the AP or a DNS server on the internet, with a cisco or enterasys card from the other room 30 feet away. Up against 40% pinging my AP or DNS server on the internet from 3 feet away. The link will not stay up in the other room. I have called dell support and was on hold for 45 min. if you hit business you will be there in 5 min (that is why I told my girlfriend to by a dell because they have a good warranty now I am eating my words) thanks dell! they have yet to fix the problem. I would like to get my girlfriend to get her money back for the card.
pretz
24 Posts
594
0
Posted December 30th, 2003 16:00
Here are some settings in the 192.168.1.1 area...
IP Address: 192.168.1.1 (Device IP)
255.255.255.0
Wireless: Enabled
SSID: Amber
SSID Broadcast: Enabled
Channal 4
WEP: Mandatory selected (and it is working with the linksys network card)
Connection Type:
PPPoE
From the "wireless" tab in the area:
Filmware VersionL 1.1.2 (yes it is updated)
Beacon Interval: 10
RTS Threshold 2304
Fragmentation Threshold: 2304
DTIM Interval: 3
Basic Rates: 1-2-5.5-11 BMps (had to change from default cause the other was really slow)
TX Rates: 1-2-5.5-11 MBps (default)
Preable Type: Lon Preamble (default)
Authentication Type: Both (default)
Antenna Selection: Diversity Spread on
Station MAC Filter: Disabled