UNSOLVED

ABelton

updated

21 years ago

A

ABelton

50 Posts

0

15820

March 12th, 2006 01:00

Connecting with Dell 1450 WLAN to WEP 802.11-mixed on Linksys WRT54G

In the past I've had no issue connecting to my router with both my x30 and Iinspiron XPS Gen1 using a WPA pre-shared key.
 
However, I just picked up a Omnifi DMSI music streaming box and it doesn't support WPA, just 64 or 128 bit WEP.
 
'Alright, I thought, I'll just change my encryption, no problem, right?'
 
HA!
 
So I logged into my router and switched to "128 bits 26 hex digits" WEP on the router and entered a 13-character alpha-numeric passphrase (all-caps).
 
I apply my settings and, to no surprise of my own, my laptop loses connection. I try to re-connect, switching the info on the WLAN utility to being a shared WEP system and entered the same key as I entered in the linksys utility, in all caps, as before.
 
No luck. I was assigned an IP address but I had "Limited or no connectivity" according to the utility.
I've since updated the firmware of the router and still no luck. I'm running the latest WLAN card drivers off the Dell support website.
 
Does it look like I'm missing anything obvious?
Setting up the WPA-PSK before was so easy, I figured WEP couldn't be that bad...guess I was wrong.
 
Any advice or suggestions would be greatly appreciated ASAP!
  • ABelton

    50 Posts

    549

    0

    Posted March 12th, 2006 01:00

    I entered the passphrase...

    It's 13 characters and that's how many the Omnifi/Dell WLAN accept for 128 bit WEP.

  • esquire

    2 Intern

    •

    2542 Posts

    549

    0

    Posted March 12th, 2006 01:00

    Did you enter the Passphrase or the network key on your client?
     
    Logon to your WRT54G and check your encryption key(s)
     
  • ABelton

    50 Posts

    549

    0

    Posted March 12th, 2006 02:00

    First of all, thanks for you responses!
     
    Now, to clarify, by "network key" you mean one of the strings of 26 hex characters?
     
    I'm on a desktop now, but I'll go test that out on my laptop momentarily.
  • esquire

    2 Intern

    •

    2542 Posts

    549

    0

    Posted March 12th, 2006 02:00

    From the documentation, the WLAN 1450 looks like it's Broadcom based adapter so it should support 26 character HEX based 128bit WEP keys.  Unfortunately, the Passphrase on the Linksys doesn't work that well - I couldn't even get my WRT54G (before there was WPA support) to accept WEP passphrases even with a Linksys card.

    See if you can use Windows own client instead and enter the network key manually

  • esquire

    2 Intern

    •

    2542 Posts

    549

    0

    Posted March 12th, 2006 03:00

    Yes.  Windows refers WEP/WPA encryption key as network key.
  • ABelton

    50 Posts

    549

    0

    Posted March 12th, 2006 19:00

    OK, it all works great now!

    I entered the hex string into my laptop and it's connected and also into the Omnifi box, which worked fine once I switched to serving music from Musicmatch, instead of 'simplecenter' the UPnP server bundled with the omnifi box.

    Thanks again for your help!