UNSOLVED

157Frog

updated

19 years ago

1

157Frog

3 Posts

0

5069

February 1st, 2008 12:00

Whats the best way to fully uterlise server NIC's with multiple PowerConnects

Hi All,

 

First posting so apologies if I get this wrong.

 

I have 16 PE2850's and 2 PowerConnect 5324's in one rack and I want to see what is the best practice for networking it all up.  The 2 PC5324's are single fibered back to another switch. 

 

How should I connect up the servers? 1 server with both NIC's going to the same switch and teamed or loadbalanced.  Or perhaps each NIC going to either switch so if a switch fails then the server stays up. 

 

I have been hunting around for some time looking for a best practice but find nothing! Obviously I want to maximise the throughput that I can but what are the suggestions. 

 

Also taking it one stage further.  is there a best practice for teaming 2 fibers from a switch to a central switch again looking to maximise throughput.

 

I'm no network expert but manage our company network with good success.  Now looking to improve on the potential.  If I haven't explained well then just ask and I will answer as best I can.

 

Thanks in advance

 

Mark

No Responses