More on Parallelism. Remember that paralellism settings are available at almost every aspect of the Networker Config, Server, Group, Client, Drives (Target Sessions), and Pool. You Need to check all these. Pools can be configured to be serviced by specific drives, Check that NO drive allocations are made on the Pool options.
While the job is running check the number of sessions it has open. To use a second, or more Drives the number of active sessions must exceed the number of Target Sessions set on the drive. Example Job with 10 Sessions, 2 Drives with Target Sessions of 4. First 4 sessions will go to drive1, then the next 4 will go to drive 2. Since the Traget sessions of both drives are now full, the last 2 sessions will be spread evenly across the drives, resulting in 5 sessions each.
The Networker Performance Tuning Guide has detailed info on Parallelism and related settings
ble1
6 Operator
•
14354 Posts
•
56186 Points
616
0
Posted March 27th, 2009 12:00