How can I format an LTO tape, that was used by other application?
I am starting with networker and I found that there is no way to format tapes with networker, do you have a procedure to format the tapes, so networker can use them??
In NETworker, formatting is know as labelling. This is either done by command line or through NMC->Devices->Shoose the device(if standalone or disk) OR slots if library, right click and select labell. You need to confirm the media pool here and click OK to label the tape.
post any errors you get if you have allready done this.
Sorry I was not really clear in my question.. The tapes have already a format and data by other application, and we want to reutilizate that tapes in networker but when we try to label them networker cand do that job
Reutilising like you can't append the data with the old format in the Networker , if you have a Autochanger then you can label to a seperate Pool , if you labeled it , it means the tape has formatted and you can use in the networker .
Sorry I was not really clear in my question.. The tapes have already a format and data by other application, and we want to reutilizate that tapes in networker but when we try to label them networker cand do that job
That's very strange as tapes should not have NW label on so NW should be happy to overwrite it. Can you post exactly what is the error you get? NW packages comes with at least one tool which can be used and so do most of OSes, but before we go down that road can you show us an error please?
Networker can use any tape provided it is supported by whatever physical drive you have; meaning you can't format/label a SLT tape in a LTO drive. Neither can you format/label a WORM tape in an LTO drive. I have used tapes formated by Veritas, TSM and other Networker servers without a problem. You will get the message that the label is unrecognized and Networker will happily overwrite the tape. You must however have the attributes "Use Media from Other Pools and Recycle Media from other Pools" set on the Properties of the Pool you are using to label the tape.
I do not believe that was ever the case... actually it has been for long time a wish of certain customer for NW to recognize certain labels by other products since back then sharing jukebox with two or more applications was common and library partitioning (HW or SW) was pretty new and/or expensive.
By saying that I do not say there is no way perhaps to have record written in a way that NW can't handle it or to get it confused - I believe few years ago I have heard of that too, but nowadays that does not seem to be the case (except for EDM which is part of design).
treesk
26 Posts
3004
0
Posted October 28th, 2009 22:00