Right type of DVI extension cable for UltraSharp 1800FP?
Greetings,
I am looking to get a DVI monitor cable extension for my UltraSharp 1800FP <--> Dimension 8250. I have some questions in case anyone can help:
1) I have seen variations of DVI listed for cables, e.g. DVI-D and DVI-I, and would like to know the specific type I should look for.
2) What about signal loss? I'd like to be able to have the monitor be 15-20' away and wonder if there's a problem with using a cable that long.
3) I believe my existing cable is M/M from PC to monitor. Would it be well or ill-advised to get a F/M extension so I buy a shorter (thus cheaper) cable and use the cable I have now to make up the difference? Is there some reason to prefer a single, longer M/M cable?
4) This question is more a matter of opinion than anything else: the purpose of this extension is to allow viewing DVD movies played on the computer via the monitor in the living room without moving the computer from the office where it is mostly used. For that purpose, is the difference in DVI and VGA connection worth the difference in price, if any?
Thanks very much in advance for any info, advice, and suggestions.
This monitor uses the DVI-D cable. Do not use both analog and dvi cable at the same time unless you are connecting 2 monitor to the system. I am not sure if using a cable that is 15-20 feet away will cause problems.
Message Edited by DELL-Jesse on 06-23-2004 09:01 AM
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
247
0
Posted June 23rd, 2004 12:00
Magus Coeruleus,
Thank you for using the Dell Community Forum.
This monitor uses the DVI-D cable. Do not use both analog and dvi cable at the same time unless you are connecting 2 monitor to the system. I am not sure if using a cable that is 15-20 feet away will cause problems.
Message Edited by DELL-Jesse on 06-23-2004 09:01 AM
Jesse L (retired)