UNSOLVED

swiftone

updated

21 years ago

S

swiftone

2 Posts

0

23185

November 30th, 2005 20:00

19" UltraSharp 1905FP

I just purchased a 19" UltraSharp 1905 flat panel monitor to replace an old bulky 19" Gateway monitor.  Once the monitor was connected, everything appeared blurry.  I checked the resolution and noticed that it was only set to 1024x768.  When I changed the setting to the recommended 1280x1024, everything became very condensed on the screen (ex. when browsing on the web, only about 2/3 of the screen is used for display)   Why would this be?  Am I lacking certain graphics capabilities?  Help. 
  • stevez2

    96 Posts

    1051

    0

    Posted December 1st, 2005 09:00

    Not sure why this is...did you load the drivers for the monitor from the CD?
  • chulett

    581 Posts

    1051

    0

    Posted December 1st, 2005 11:00

    Specifically, does Windows 'know' what monitor you have? Right-click on an empty spot on your desktop, select Properties and then switch to the Settings tab. What does it say for Display?

     

  • OTIS6

    1 Message

    1051

    0

    Posted December 1st, 2005 14:00

    Mine is doing the same thing, what can I do?  It only seems that it happens with certain web sites.  For example, if I go to yahoo finance it will fill up the whole page, but if I go to ESPN the type is smaller and there is a big space on the right side of the monitor.
  • swiftone

    2 Posts

    1051

    0

    Posted December 1st, 2005 22:00

    The CD that was included with the monitor only contained control and display setting information. There was no driver software included.  Also, the display setting that I have is identified as "Plug and Play Monitor on SiS 630/730".  I'm not sure what this means but I suppose it is the video driver that I have?? Maybe I need to update the driver?
  • chulett

    581 Posts

    1054

    0

    Posted December 1st, 2005 23:00

    If it says "Plug and Play" then you are just using the generic monitor drivers. Did a quick search on Dell's site and found these, which are for the 1905FP:

    http://ftp.us.dell.com/monitors/R86319.EXE

    The download page for this driver is here: http://tinyurl.com/cd82z
     
    The full URL was a mile and a half long, so went the 'tinyurl' route. :smileyhappy:
     
    Hope it helps.
     
  • CTskydiver

    1 Rookie

    •

    932 Posts

    1054

    0

    Posted December 2nd, 2005 07:00

    You don't have a problem.

    Most web pages don't fill the whole page, width wise, at 1280x1024 resolution.
    This is because web sites are designed to be seen also by folks with lower resolutions without the need to scroll.

    It's all up to the designer of the site. On this forum, you can select to fill the whole frame or not within your profile display settings. By default, it is only 800 pixels wide.
  • Lizard14

    4 Posts

    1055

    0

    Posted April 28th, 2006 12:00

    Yes, he/she does have a problem - & I have the same. We bought the dell 1905fp monitor about a year ago & have had the exact same problem - condensed web sites. To illustrate, we bought a 19" flat panel from HP a few months ago & on websites that the dell monitor only takes up half or 2/3 of the page, the HP monitor shows them beautifully on the entire page. Several months ago I did try updating the driver - & I checked again after reading these posts & the properties/settings menu does list the dell 1905fp rather than just plug & play. We also have a regular monitor attached to the computer as well. I have been trying to fix this problem since we got the monitor & was glad to find this post in which someone else is having the same problem. I thought I might try & download the listed drivers just for the heck of it, but if anyone has any other ideas, I'd appreciate it!
  • Lizard14

    4 Posts

    1055

    0

    Posted April 28th, 2006 12:00

    Just to clarify, the dell 1905fp & the non-flat panel 19" are on 1 computer & the HP flat panel is on another computer.
  • chulett

    581 Posts

    1055

    0

    Posted April 28th, 2006 22:00

    Out of curiousity, your comparison is only really valid if all three monitors are running at the same resolution - is that the case?
  • Lizard14

    4 Posts

    347

    0

    Posted April 29th, 2006 10:00

    The resolution on my HP monitor is 800x600 - and as I said it displays all websites perfectly. The dell 1905fp monitor is at 1280x1024. I have tried switching it to 800x600 but then the icons & everything else are huge. I have tried different resolutions but it makes no difference.