UNSOLVED

shosaleh

updated

14 years ago

S

shosaleh

10 Posts

0

69665

September 13th, 2012 12:00

XPS 15 L502x replaced screen foggy problem

Hello,

I ordered a screen from laptopscreens.com for my XPS 15 L502x, with a higher resolution (1920*1080) than the original (1366*768). the site seemed trustworthy so I am not sure if the problem is the screen. I installed it myself and it works fine when you start up however it has a whiter than normal screen as if a foggy layer is placed on the screen. Another reason I think its may not be the screen is that after restarting it a few times, for a a few seconds the colour was fine when booting up but when I logged in it became whitish again. Do I have to update any drivers etc. Someone Help!!

 

  • DELL-Rajath N

    6 Operator

    •

    1793 Posts

    1751

    0

    Posted September 13th, 2012 13:00

    Hi shosaleh,

    I’m sorry to hear that the LCD screen looks foggy after the replacement. To provide an accurate resolution, please help me with the following information:

    1. Does the screen look foggy at the Dell logo?
    2. Does the screen look foggy while on the BIOS page? (To go to BIOS, restart the computer and start tapping F2)
    3. Please perform a Built In Self-Test on the screen by following the steps below:
        a) Turn off the laptop.
        b) Press and hold the “D” key and then press the “Power” button. Release both the keys together 
             when the laptop starts. You will be able to view a test on your screen.

    Reply to this message with your findings.

  • shosaleh

    10 Posts

    1752

    0

    Posted September 13th, 2012 14:00

    1. Yes, but a few times it was normal colour (why I thought its not the screen but some configuration issue)

    2. Yes at BIOS it was still foggy

    3. I tried this but it does not go to the test, I did go to a colour test before on suggestion from somewhere else but I can not recall how and the coloured bars did show but with the foggy/white layer on it, but as I said it did not go to any test by holding "d" and power and releasing.

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    1772

    0

    Posted September 13th, 2012 16:00

    The data cable runs between the connector on the mainboard and the connector on the back of the screen.

    You can see them below - and they are different depending on the screen resolution.

    www.parts-people.com/index.php

  • shosaleh

    10 Posts

    1772

    0

    Posted September 13th, 2012 16:00

    I found this Dell XPS 15 (L501X / L502X) 15.6" Full HD (1080p) FHD LCD Video Ribbon Cable - V73D3, it says it is compatible but how do I check my dell Part number for this part?

  • shosaleh

    10 Posts

    1772

    0

    Posted September 13th, 2012 16:00

    Is the data cable the wires connected in the back with those chips? If yes I did not and are those easily changeable? Any idea where I can get them and what is the correct one to get. Does dell sell them separately?

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    1752

    0

    Posted September 13th, 2012 16:00

    Did you change the data cable with the screen?  HIgher resolution screens usually require a cable with more wires.

  • 1228

    0

    Posted September 13th, 2012 17:00

    When you get the cable in the mail and take apart your screen you will see the cable on  the back of the LCD panel, just take out the old one and replace it with the FHD cable. Make sure you take some scotch tape and tape the connector to the the back of the LCD panel to make sure it doesnt come loose or unplugged when you install the LCD panel.

  • shosaleh

    10 Posts

    1771

    0

    Posted September 13th, 2012 17:00

    Is it easy to install? can I do it myself?

  • 1772

    0

    Posted September 13th, 2012 17:00

    Hi Shosaleh, I also replaced my screen from 720p to 1080p resolution and the problem you are having is due to the cable mentioned earlier. I have the same laptop as you so the dell part# you need is V73D3. Its the Hi Def cable used with the 1080p resolution screens for the L501x and L502x. Without this cable you will have foggy screen. You can find the cable on ebay or get one from this link: www.parts-people.com/index.php. They run anywhere from $35 to $45.

    If you have any questions let me know.

  • 1228

    0

    Posted September 13th, 2012 17:00

    here is a 2 part video on replacing the screen and ribbon cable: Part1:  Part2: