UNSOLVED

aheitner

updated

22 years ago

Closed

A

aheitner

3 Posts

0

12280

December 24th, 2004 01:00

Soda spilled on Latitude CPi - what to do?

I have a Latitude CPi running Win98. The machine is probably 6 yrs old and this afternoon I accidently spilled diet soda on the keyboard.

Now, the computer won't boot up, either on battery or outlet power. When I try to boot, the three lights (caps lock, scroll lock, num lock) blink and the computer beeps.

Is there anything I can do to fix the problem and get it to boot again?

If not, is there a way to just copy the contents of the hard drive onto a backup device? I do fairly regular backups, but last one was ~2 wks ago, so I'd like to recover data.

If fixing requires a professional technician, are there any Dell recommended service techs in the Boston area?

I'd like to save the computer, but if it's not possible, as long as I can get the data, the computer's given me pretty good service.

Thanks,

Andrew
  • kamunyama

    4 Posts

    507

    0

    Posted December 24th, 2004 01:00

    if your computer does not boot after a spill you may have damaged your motherboard. have a professional take a look at it.
  • chapmasj

    306 Posts

    507

    0

    Posted December 24th, 2004 08:00

     

    First. Remove battery and AC power (do not try to power machine until it is clean and dry.

    If you are able/capable remove keyboard from laptop and try to clean any residue of soda - use water, but as little as possible. Let everything dry out (see above) put back together and try to power up machine from battery.

    For any liquid spoilage on a laptop speed is of the essence. Call in an expert if you can get to one quickly but remove power asap in any case. If the liquid is other than water or pure alcohol (and I don't mean JD) or for that matter any other similar liquid which does not leave a deposit try cleaning with water (or pure alcohol if you happen to have it to hand) - use water/alcohol  sparingly and be very gentle with it. Allow to dry at room temperature (or a little higher such as an airing cupboard) - give it plenty of time to ensure that it fully dried out (about 24 hours). Try powering up. If no joy call in an expert.

    Hope that helps.

  • aheitner

    3 Posts

    507

    0

    Posted December 25th, 2004 15:00

    Thanks everyone. I ended up taking it to a repair shop just so they can copy all the contents of the HD onto a backup drive. The computer was not in great shape anyway, so I'll likely have to trash it.

    Aside from the battery and cd drive, are there any other parts I should strip off that have any use/value? Is it possible to use the monitor with another computer if I somehow detatch it from the rest?

    Thanks,

    Andrew
  • impsondm

    7 Posts

    507

    0

    Posted December 26th, 2004 20:00

    unfortunatly, there is no way to use the TFT that came with your laptop on another computer without having to buy some slightly expensive converters & other stuff.
     
    It would wind up being cheaper to find the same size flat panel TV with a DVI input (you can find them for around 350$ on sale if you look at the right places)
     
    as for what to actually do with the dead laptop that you have, I sent you a private message on that issue.  :)
  • PovHum

    1 Rookie

    •

    123 Posts

    507

    0

    Posted December 27th, 2004 16:00

    You can always use the LCD on another CPi.