
UNSOLVED
Closed
J
jeff_shaw1
1 Rookie
•
10 Posts
0
24323
November 20th, 2003 05:00
My Inspiron 8500 seems to have a Celeron CPU ???
I just bought a slightly used Inspiron 8500 and I am getting to know it. I flashed the BIOS to the latest A05 and when I access Setup it reports an "Intel Mobile Pentium 4M 2GHz with 512K Level 2 cache". This exactly as I expected it to be.
But when I boot to Win-XP PRO and access the Control Panel->System->Hardware->Device Manager->Processors, it shows an "Intel Celeron CPU 2.00GHz. The installed driver is supplied by Microsoft: PROCESSOR.SYS version 5.1.2600.1106 (xpsp1 1.020828-1920) dated 7/1/2002. Same report before and after I installed the latest Chip Set Drivers from the Dell download site.
When I run the official Intel Frequency ID Utility, latest version. it also reports a Celeron.
I checked the original configuration at Dell and it says "7Y124 Processor 80532, 2.5G, 512K, UFCPGA, C1" I can't decipher this. Can someone at Dell decode this info?
I checked the current configuration using the Dell download System Profiler utility and it also reports a Celeron.
I have run various other diagnostic utilities and they all show an L2 cache size of from 0 to 128K and confirm a Celeron CPU.
My questions are...
Does the i8500 BIOS A05 simply display a canned message string for the CPU type? Or is it actually detecting the type of CPU installed? It says the correct type but how can I tell? How do I know what I have, short of opening up the laptop case.
I am "hoping" that this is an incompatability in the Microsoft driver PROCESSOR.SYS. I would assume that anything that I run under XP would use this module to determine CPU type. Sound reasonable?
I don't see how I could have a down-rev CPU like a Celeron. As far as I know there is no Celeron version of the Pentium-4M that would work with the i845 chip set. Does anyone know better?
Can anyone PLEASE explain this? Or is there some new driver I need? Please help me out here?
Thanks in advance. Jeff
Responses (20)
Solutions (0)
jeff_shaw1
1 Rookie
•
10 Posts
1170
0
Posted November 20th, 2003 19:00
jonallg, I really don't understand why you posted what you did.
You didn't answer any of my questions. I really need some help and I think this can only be handled by a specialist from Dell. I think I described the problem completely. Either the BIOS or a Microsoft driver is in error. If I can't get help here, at Dell, then where do I go?
I am well aware that Intel does not produce a Processor-4M "Celeron", unless it is something entirely new. Of course, there is a possibility that the CPU could have been swapped. If so, then the Dell BIOS is lying to me.
And what does it matter from whom I purchased it from? Do you think you might know him? I doubt it.
Looks to me like you just used my plea for help as an opportunity to list your links and Dell Parts List. Get real pal. Do you have any clue at all as to why someone would post on a Dell Help Forum?
Are you some kind of "Dell Cheerleader" ? If so, go sit in the bleachers. I need to talk with the Coach or the Quarterback.your snooty attitude will you nowhere.
You just disrespected the most respected user on the board. You also are obviously not aware of the way the forum works. See the big bold letters above? It's a Community forum, not accost people and demand to talk to someone high up forum.
If you had looked around, you would have noticed that Dell techs and other personnel do not post to the board. (Hence the term community)
Do you have any clue as to why someone would post on a dell user forum? John has more than 22000 posts. You have 8. That's enough evidence for me.
I suggest you turn off the computer, open it up, and see what sort of processor is installed.
edit: see the link to the 8500 service manual a couple posts down- it'll be helpful if you decide to open up the laptop
Message Edited by ryri on 11-20-2003 05:05 PM
jeff_shaw1,
It is people like you that spoil it for the rest. Your response to John was uncalled for and after reading such responses time and time again, the people that help would have helped you say "I do not need this".
As ryri mentioned, Dell technicians do not hang out here so the people that would have helped you are just like you, customers of Dell. NOT Dell employees.
Exactly what I was thinking when I read his reply to John's response Ryri, I applaud you.
*Stand up and applauds*
Meanwhile, to stay on topic and try to answer the question I suggest exactly what Ryri did, one of the programs is not correctly showing what you have, so a very feasible way to check would be to open up the computer and physically check what processor is inside.
Here is a link to the Inspiron 8500/ 8600 Service Manual, you will find full instructions on how to take apart and remove/ install each part of your system. (Click on 'download' for the service manual, it is about 3.5MB)
Remember when you do this to have all power disconnected, including battery, and to ground yourself every minute or to so as you don't discharge any static electricity which may adversely damage one or more components
stu
- That's what I don't get, people come in here, have horrible attitudes, and no nothing about computers, when we try to help, and offer some kind of assistance, even if we don't know what exactly is the problem but we give steps to help the person figure out the problem, and they get upset and irrate because we don't know everything and demand that they get answer, and it MUST be right.
In response to jeff, try aida32, you can find it yourself on google. This guy obviously doesn'y have a clue!!
We are all adults?
When someone said we are trying to help, he was referring to the community as a whole, and lets face it pal, if you can't join the community, then you certainly don't deserve our help!
Jinan
jeff_shaw1
1 Rookie
•
10 Posts
1170
0
Posted November 21st, 2003 03:00
Wow, this is really interesting. I can see this is going to be great fun!
I have read thru all of the previous posts and I see words like "disrespected", "snooty attitude", "horrible attitude". Where in my post did I do these terrible things? Exactly what words did I use that triggered this response? No foul language or character attacks, where is it, please?
Come on people, Give Me a Break! This is NOT high school - you are dealing with an adult. I did not come here to stroke your collective egos or kiss your little pink fannys.
RYRI: So you think John is "the most respected user on the board". Well thanks for sharing your opinion. And John has 22,000 posts. WOW! That IS impressive. And I only have 8 - I wasn't even counting. Yes, I have read the 8500 Service Manual and I am planning on opening it up. But FIRST, I have attempted to determine if this problem was known about in this "Community". Obviously not.
OREXIC: You have absolutely nothing of substance to contribute at all, do you pal! Except to support your buddies opinion. Real Kool Man!
BAY WOLF: So I spoiled it for you. BOOHOOHOO! Again, nothing technically relevant to say. Just go along with the crowd, right? I checked out your web site - not bad at all. In fact, I can see that you do try to help others. Except NOT me; I guess I really pizzed you off, huh? Power to the written word.
SAKOR1: THANKS for having the FOCUS to make the attempt to help, plus your civil response. Yes, I did read the manual, twice, before and after I purchased the unit. I have been into various Dell laptops several times in the past. But not the i8500, not yet! But it will happen.
CSMITH06: You say "...we give steps to help". When did YOU do that? And what "help" are you referring to? Now you are taking credit when you don't deserve it. And how about "...no nothing about computers". The word is KNOW fool. And then you write " demand that they get answer". IF you had actually read my post you would have seen "My questions are...". Since when are questions the same as demands? You are obviously a little weak on spelling and reading comprehension. Either that or you are purposely distorting my message to score points. At least you recommended AIDA32. Thanks for that!
If you folks are disappointed with me, so be it. I TOO am disappointed as I have spent two hours of life here and have come away with no solution. Except read this manual, open up the box, run this program. Well DUH! As a support forum, this place is a "dry well". And yes, I know, it's all my fault.
Good Bye and Good Luck.
Jeff,
Everyone who has replied to your thread, including me, think that you have bad attitude. If you want to be helped, you have to be more careful how you deal with people. Its called netiquette.
You made the right decision finally to leave this forum. You don't belong here. Say Hooray for yourself!
And you might have noticed that eventhough they were chastizing you for your attitude, they were reluctantly giving some suggestions. In the ssame vein let me suggest a nice program. Try a google search on CPU-z. its a small utility that gives in-depth info about the CPU, its cache, its process size etc.
Message Edited by itsramesh on 11-21-2003 12:14 AM

johnallg
2 Intern
•
7280 Posts
1170
0
Posted November 20th, 2003 15:00