UNSOLVED

sloomy

updated

21 years ago

Closed

S

sloomy

12 Posts

0

10238

November 21st, 2005 14:00

How to find out the DELL S/N of Inspiron 8100 motherboard ?

Hi

I have a Dell Inspiron 8100 Notebook, but the notebook is not starting. It has no guarantee anymore, so i'm going to replace my motherboar.

But there are few sorts of Dell 8100 Motherboards and also the C800 motherboards are also usable.

Where is the Dell Serial Number/Model Number of the motherboard written ? I was not able to find it out.

Thanks for any helps, and answers.

Cheers

sloomy
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    201

    0

    Posted November 21st, 2005 16:00

    The part number is on the bottom of the board, near the memory sockets.
  • leduke30

    2 Intern

    •

    4033 Posts

    201

    0

    Posted November 22nd, 2005 04:00

    The C800 board uses a different type of CPU. The board will fit in the plastics for the 8100, but are not the same; are you sure you didn't mean the C810 Boards? Those are the same as the I8100 boards.
  • sloomy

    12 Posts

    201

    0

    Posted November 22nd, 2005 14:00

    yes, i have thought , that the motherboard of an 8100 and C800 will be the same, but it isn't.

    I have bought an C800 motherboard but the CPU sockets are not the same.

    What are the types, what the the both CPU sockets called ?

    I will rather buy an suitable CPU for the C800 motherboard and use it, than to find another complete 8100 motherboard.

    What is the fastest CPU usable in C800 motherboard, what is the model number ?

    Thanks

    s.

    Message Edited by sloomy on 11-22-2005 10:07 AM

  • leduke30

    2 Intern

    •

    4033 Posts

    201

    0

    Posted November 22nd, 2005 15:00

    The C800 Uses a Mobile Pentium III(mPGA-2) Type SL53S for 1ghz(MAX) and SL53L for 850mhz; not all of the boards will use the SL53S because of a board limitation; all of them seem to support the 850mhz with the latest BOS version.

    The C810 uses Pentium III-m(mFCPGA-2) Type SL5CK for 1.13ghz(MAX)

    That being said, since you have the CPU from your old defunct board, I would strongly advise you to resell the C800 board you bought and get the proper C810/Inspiron 8100 board. They are of better quality than the C800 boards. I'll give you this link to a C800 board problem which is not well known, and does not affect the C810 boards as the hardware is different