
UNSOLVED
Closed
How do you restore a 9300 to as-shipped condition? Please Read.
My wife received her 9300 yesterday and my wife wanted me to wipe it clean, so I did that with the included Operating System (XP Home Edition) disc. I expected drivers to at least be installed automatically, but none were. So I wanted to restore it to it's factory settings by doing good 'ole CTRL + F11 at boot.
Nothing. Nothing happened. I tried it, like, fifty times. Not a thing.
I called Dell Support and after waiting an hour and a half, was told to use CTRL + F11. I explained that I tried that, it didn't work. After much conversation back and forth, it was finally discovered that my laptop shipped without the Drivers & Applications CD I should have received. That is now on it's way to me.
However, the question remains: How do you access the restore functionality on the 9300s? If there is none, what's the point of the hidden partitions? Surely, diagnostic tests can't take up 3 GB+ of space?
If anybody can help, I'd really appreciate it.
Nothing. Nothing happened. I tried it, like, fifty times. Not a thing.
I called Dell Support and after waiting an hour and a half, was told to use CTRL + F11. I explained that I tried that, it didn't work. After much conversation back and forth, it was finally discovered that my laptop shipped without the Drivers & Applications CD I should have received. That is now on it's way to me.
However, the question remains: How do you access the restore functionality on the 9300s? If there is none, what's the point of the hidden partitions? Surely, diagnostic tests can't take up 3 GB+ of space?
If anybody can help, I'd really appreciate it.
Responses (10)
Solutions (0)
- I did not delete any partitions. I simply formatted the visable C Partition. If I view the hard drive with Disk Management, it still shows three partitions: A 55MB FAT partition, a 33.56GB NTFS Partition ( C: ) and a 3.64GB FAT32 Partition. I know all the stuff I want/need is on that FAT32 Partition.
I'm wondering if CTRL+F11 is no longer the way to access the Restore Partition. Or is, perhaps, my F11 key broken? ;-)Message Edited by savagexp on 03-23-2005 01:06 PM
- the restore partition along with the utitlty partition is very much still there. the bad news however is that when you RE.installed Windows XP via the CD, you overwrote the Master Boot Record that allowed the Ctrl+F11 feature. so now, there is no way you can access the Restore partition again. if in the future you want to delete the 3rd restore partition - you might just as well, since it has been rendered pretty much useless.The F12 feature will still work as that is feature is written into the BIOS. and when you press that all you really access is a boot menu anyways. Unless you delete that partition in which case you can still hit F12 and it takes you to the boot menu, but when you run diags. it only runs the 90/90 diags, and you would have to use the Dell Resource CD to run the 32 bit diags.i have heard rumours that you can still access the restore partiton via Symantec PC restore [i believe its a bootable disk]. whether you can actually run the PC recovery i have yet to hear. i also have no idea where to obtain PC restore.hope that clears up a few things for you.JUST A NOTE TO ANY NEW USERS THAT ARE READING THIS. ** DO NOT USE THE WINDOWSXP CD TO REINSTALL THE OS IF YOU ALREADY HAVE THE PC RSTORE FEATURE - UNLESS YOU NEVER PLAN ON USING PC RESTORE. and this only applies to users who have purchased a new system from what i believe is AFTER November 04.
Hellosavagexp,
Welcome to the Dell Community Forum,
If your Restore partion is ok, you have 2 seconds to press the CTRL+F11 once you see the Blue Bar with WWW.DELL.COM on it. Make sure that you don't press these keys until you see that screen. Hope that this helps.
Thanks,
- its not that you 'shouldn't' use the windows XP cd. In fact, if your system was purchased BEFORE Nov. 04 [approximately], then you actually HAVE to use the windows XP cd to reinstall... BUT, for those that bought AFTER that date - your system comes with the MRI and if you desire a 'Factory Spec' reinstall, then using the windows XP disk will destroy [overwrite] the MBR and thus rendering your Ctrl+F11 function inoperable. The partition will still reside on your HDD - but you just cannot access the feature or function of it.thus, if the MBR is overwritten then you will again, HAVE TO use the windows XP cd. Even on a system that was purchased AFTER said date. For those systems that come with the MRI you actually have the ability to create the Windows XP disk and Resourse CD [ the latter is an assumption] within Windows. This is ONLY the disk that would have shipped with the system had MRI never been implemented in the first place. it DOES NOT create a CD that does what the MRI is able to do.differences and advantages between MRI and WIndows XP CD:MRI [Media Reduction Initiative]:PROS:-runs directly from HDD-factory spec reinstall [including all drivers already installed, all apps already installed, the initial Windows/Dell setup screens, the OEMXXX.ini/.bmp files, user guides, and Help and Support] in everyway, as the system was when you ripped open the tape on the box, took a deep breath in to smell that oh-so-fresh electronic toy scent.-it takes about 70% less time to implement from start to finish, than a clean windows/drivers install. i have seen it take as little as 5 minutes to go from a completely unsuable OS unit, to a system that seems brand new ready to go out of the box.CONS:-EASILY rendered unsuable [broken]-the restore partition takes up about 2-3GB of HDD space [don't bother trying to find it if your OS is using NTFS], which these days is minor.-you get all the extra "stuff" [c r a p] software that is installed upon initial bootup [AOL...! etc etc]-if HDD goes bad, and needs to be replaced, so goes the MRIWindows XP clean install from CD:PROS:-absolutely bare minimal software install [install apps you want and when you want] no clutter [AOL...! etc etc]-control of partitioningCONS:-time consuming-manual install of ALL drivers and utilities-manual locating of Help and Support files and Programs-can never go back to factory spec [this is relative to me only, opinions may differ]these are just a few, im sure there are plenty more, and of course its all based on opinion too. regardless, i made no statement that a clean install cannot be performed if you have MRI, some choose to loose that partition anyways, but, for those that like the factory spec idea, and if you re-read my lil disclaimer from my first post you will see that i indicated "... UNLESS YOU NEVER PLAN ON USING PC RESTORE..." So to reiterate, If you like the factory spec idea... such as i, then it would be wise to never do a clean install using the windows XP CD... on the other hand if your desire is to NEVER use the MRI then feel free to use the CD. Plain and simple.
- Hi,
Just my 2cs worth.
I have a 700m and I did a reinstallation with the Win XP disk because I wanted to keep the dell diagnostics partition but delete off the restore partition as 3 GB is way too huge for a 80GB harddisk.
I can confirm that I can still run the 90 diags AND the 32 bit diags from the F12 button on bootup.
Regards,
Mike.
>>>The F12 feature will still work as that is feature is written >>>into the BIOS. and when you press that all you really access is a >>>boot menu anyways. Unless you delete that partition in which case >>>you can still hit F12 and it takes you to the boot menu, but when >>>you run diags. it only runs the 90/90 diags, and you would have >>>to use the Dell Resource CD to run the 32 bit diags. Balaji Ramanath
2 Intern
•
1765 Posts
72
0
Posted October 9th, 2008 18:00
Go to this address to request a set of backup discs from Dell:
http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form?c=us&cs=19&l=en&s=dhs&redirect=1

mandatory
107 Posts
444
0
Posted March 23rd, 2005 16:00
Your computer shipped with the hard drive divided into three partitions. The C partition was visible to you but there were also two small hidden partitions. One held the diagnostics you can boot to with F12. The other held the restore image which you could have booted to with Ctl+F11.
When you used the XP CD to wipe the drive, you probably deleted the two hidden partitions along with the original C partition. Even if the two hidden partitions are still present, the restore partition would be unusable because you deleted the original C partition which held software that the restore partition needs to function properly. So it's gone for good.
You can open the Disk Management console and view the partition structure of your hard drive. If you see that there are still two hidden partitions present, try booting to the F12 diagnostics partition. It may still work. The diagnostics partition is the small one, about 60MB or less. The restore partition is the bigger one, about 3GB or so.
Regardless, you'll have to go to the Dell Support website and click on Downloads. Get all the appropriate drivers and software for your computer and build it up from scratch. Even if Dell sends the driver CD to you it'll be out of date.