UNSOLVED

skate624

updated

23 years ago

Closed

S

skate624

46 Posts

0

38518

April 10th, 2004 17:00

How do i get rid of the Safely Remove Hardware icon in the System Tray?

How do I get rid of the Safely Remove Hardware icon in the System Tray? On Windows XP Home

  • leduke30

    2 Intern

    •

    4033 Posts

    855

    0

    Posted April 10th, 2004 19:00

    When you installed W-XP did you run it as an upgrade to W98/98SE or do a Clean Install? If the first, Check in Control Panel/Add-Remove Programs for the presence of Softex Bay Manager. If it is there, Highlight and remove it. The Icon you speak of comes from it.
  • leduke30

    2 Intern

    •

    4033 Posts

    855

    0

    Posted April 10th, 2004 20:00

    Experience mainly. I got into them about 4 years ago and could see that it was going to be expensive if I had to call Tech support very often to straighten things out. So, I set out to learn as much as I could. I was an Electronic Warfare Officer many years ago on a B-52, back in the Vacuum Tube days, and I suppose that might have laid some foundation. I am at a loss to account for that Icon, as W-XP is not supposed to support Hot Swap other than PCMCIA cards. That is why I thought it might be a carryover from W98/Bay Manager, but apparently not.
  • skate624

    46 Posts

    855

    0

    Posted April 10th, 2004 20:00

    how do you know so much about computers? how long have you been interested in them? im 13 ive been interested in them for about 1 year now. I know a fair amount, like i take parts, and put together computers, then change the BIOS settings and change the cpu speed (mhz) and the FSB speed, but i put in about 3 fans, and keep the sides off so it never overheats.
  • skate624

    46 Posts

    855

    0

    Posted April 10th, 2004 20:00

    i did a clean install of it this is a new laptop, inspiron 1100 came with windows xp on it, and i reinstalled windows, and it wasnt there, than all this spyware got onto my computer, and i never download or use kazaa, and my computer was full of spyware so i reinstalled windows again, and then it was just there lol, when i reinstall windows, i always delete windows, the partition, and reformat the hard-drive using the ntfs file system. but this time that Safely Remove Hardware thing keeps coming up.
  • Ed C

    2 Intern

    •

    3247 Posts

    855

    0

    Posted April 10th, 2004 21:00

    You can not change these setting on a Dell PC, notebook or desktop. Nor do any major manufactures PCs allow this.

    We are not blind. You don't have to make the font so big. Thanks

    Message Edited by Ed C on 04-10-2004 06:21 PM

  • skate624

    46 Posts

    855

    0

    Posted April 10th, 2004 21:00

    hey leduke30, do you know how to Change cpu and FSB speed in BIOS? like overclocking? please respond ASAP, and if you do please explain to me what to do after im in BIOS, with the mainboard in Configure mode. thanks :-)
  • Ed C

    2 Intern

    •

    3247 Posts

    855

    0

    Posted April 10th, 2004 21:00



    @leduke30 wrote:
    When you installed W-XP did you run it as an upgrade to W98/98SE or do a Clean Install? If the first, Check in Control Panel/Add-Remove Programs for the presence of Softex Bay Manager. If it is there, Highlight and remove it. The Icon you speak of comes from it.

    Never heard of this program, Softex bay manager, with XP or a Dell notebook.


    Also to the OP

    This icon can not be removed, as far as I know, from a winXP install. It is part of XP. I even have it when I have a removable component connected to the USB ports on my desktop. If it bothers you that much remove any and all removable drives, CD, HDD or floppy, and PC slot cards. It will go away.

  • skate624

    46 Posts

    855

    0

    Posted April 10th, 2004 21:00

    yes you can

     

    heres my inpiron 1100

    2.4ghz celeron

    768 mb ddram

    30gbhard drive

  • skate624

    46 Posts

    769

    0

    Posted April 10th, 2004 22:00

    thanks, but i have windows xp, and this computer never had windows 98.
  • leduke30

    2 Intern

    •

    4033 Posts

    769

    0

    Posted April 10th, 2004 22:00

    Look at any CP series Laptop with W98 Download list and you will find Softex Bay Manager. It allows Hot Swapping Hardware while up under Windows.  It is not used with W2k, W-ME or W-XP, but sometimes the presence is carried over on an Upgrade and it does put an ICON in the Taskbar. I know you think you know it all, but you don't.

    Message Edited by leduke30 on 04-10-2004 06:55 PM