UNSOLVED

Izecson

updated

20 years ago

Closed

I

Izecson

4 Posts

0

15266

November 4th, 2006 14:00

Fan running continuously (Inspiron 6400)

Last 3 times that i've switched on, the fan has started up immediately and not stopped; after a few minutes i restart and starts up again OK (without fan). When fan is running, CPU takeup is between 50-60%, and there's a file called DOT1XCFG.EXE which seems to be doing something, and may be the cause ???
 
What are general causes for fan runnig continuously from startup; i have 512mb RAM, and nothing that demanding ?? Only item added in last few days is an update to McAfee??
 
Can low temperatures be a cause in some way, since it is used in room with little heating, so temp is in single figures - however specs identify that will operate above 0 degC.
 
Any advice appreciated,
Izecson
 
 
 
  • Kwopau

    2 Intern

    •

    272 Posts

    527

    0

    Posted November 4th, 2006 15:00



    @Izecson wrote:
    Last 3 times that i've switched on, the fan has started up immediately and not stopped; after a few minutes i restart and starts up again OK (without fan). When fan is running, CPU takeup is between 50-60%, and there's a file called DOT1XCFG.EXE which seems to be doing something, and may be the cause ???

     

    What are general causes for fan runnig continuously from startup; i have 512mb RAM, and nothing that demanding ?? Only item added in last few days is an update to McAfee??

     

    Can low temperatures be a cause in some way, since it is used in room with little heating, so temp is in single figures - however specs identify that will operate above 0 degC.

     

    Any advice appreciated,

    Izecson

     

     

     



    that is weird. Usually the fan only turns on when the cpu is hot and needs to cool down. But i wouldn't know how to fix that problem.
  • deadfish2

    9 Posts

    527

    0

    Posted November 5th, 2006 04:00

    mine is always on low speed automatically and when the weather is hot or it is doing processing intensive stuff the fan switches into medium or up to high etc, i wouldn't worry about it to much. i have an inspiron 6000
  • scyntax

    2 Posts

    527

    0

    Posted November 5th, 2006 19:00

    I have the same problem. during bootup, my fan starts at full speed and wont stop unless i reboot. system gets real slow too. tried to get an answer from online support, but that was futile. they only have canned answers and dont actually seem to read what you are saying.
    something seems to be ing the life out of the cpu. try this:

    1.Turn the computer completely off.
    2.Restart the computer and start tapping "F12" key at the first Dell logo screen.
    3.You should see a one time boot menu listing a couple of options to boot the computer from. Note : You may or may not see the one time boot menu depending on the Hard Drive content. If you don't see it the first time, please repeat the steps above. If you still don't see it, you need to run diagnostics from the "Drivers and Utilities" CD that came with the computer.
    4.Select "Diagnostics" from this screen and press "Enter" key. The computer will start "Pre-Boot System Assessment" test. Note : Pre-Boot System Assessment is a short and quick test to check very basic functionality of a few components."
    5.Please press any key to boot into the "Utility Partition" when asked."
    6.Please select "Custom Test" to run individual test on computer components."
    7.Please select the designated device to run test on and click "Run Test"."
    Please run the test on the system fan.

    this is what the tech had me do. my fan tested okay, so it seems that some other program is starting, causing the cpu to immediately overheat, and turn the fan on high speed.
  • markpmm

    38 Posts

    527

    0

    Posted November 5th, 2006 21:00

    Several members have posted fan issues. You really need to monitor CPU temp to know if there is an issue. Use this utility to monitor and control the fan speed.
     
  • Izecson

    4 Posts

    527

    0

    Posted November 6th, 2006 16:00

    Thanks for the replies, am now wondering if it may in fact be related to RAM. Looking at the task manager, about 350 of that is taken up by process, and only 150ish is 'available'. Currently have ony 512 in total. Would this give potential problems when loading up XP ???
  • scyntax

    2 Posts

    527

    0

    Posted November 6th, 2006 22:00

    The issue here is not that the fan runs at high speed during cpu intensive operations (as it should) but rather that the fan comes on full speed almost immediately upon starting the boot process. yes, the fan runs continuously at low speed during normal operation. nothing I know of will cause the cpu to heat up so hot as to need to be cooled that early in the boot process. Further, examining the running processes reveals nothing unusual in my case. when this happens, the system slows down to a crawl, and there is nothing obvious that is causing the problem. I have to reboot to stop the fan from running at full speed.
  • salucchi

    2 Intern

    •

    275 Posts

    527

    0

    Posted November 7th, 2006 00:00

    Hi,

    Read this, it may help/lead you to solving your issue.

    http://www.file.net/process/dot1xcfg.exe.html

    I did a fresh install of XP and let XP manage my wireless connection.
  • Izecson

    4 Posts

    527

    0

    Posted November 7th, 2006 16:00

    Salucchi,
     
    Had a feeling it may be related to the wireless connection. However, reinstallation discs aren't now provided with the machine; seems that you now have to pay for them on top of the quoted price (but thats another story). May be a problem if i ever need to reboot from disc...

    Message Edited by Izecson on 11-07-2006 12:16 PM