UNSOLVED

Sidpaul

updated

21 years ago

Closed

S

Sidpaul

28 Posts

0

12316

August 27th, 2005 21:00

Do i have a faulty motherboard

I have an Inspiron 700m. the earphone jack was faulty so Dell prompltly replaced my motherboard(but it was refurbished). NOw i noticed a strange problem, well actually a couple of them
1.On the first screen when u enter the BIOS the service tag and asset tag fields are blank.
2.I cannot set a BIOS password, they are greyed out. even the administartor password field. they r just not accessible.
3. if i try booting my laptop from a USB HDD it does not recognize the drive..
 
All these factors are making me dread that the mobo which i got is faulty and will have to get it replaced again...
any ideas guys
  • mylah

    33 Posts

    593

    0

    Posted August 27th, 2005 22:00

    try to call tech support and have them update your BIOS. that's why you dont have the ST, and cannot create a password.
  • leduke30

    2 Intern

    •

    4033 Posts

    593

    0

    Posted August 28th, 2005 02:00

    That would do no good for the Service Tag; you need to use Asset.com to reset the Service Tag. You will not be able to set Passwords until you do, and BIOS has nothing to do with it.
     
    This file makes a Floppy Diskette that has Asset.com on it along with the Suspend to Disk files which you do not need. When it boots the laptop into DOS, at the A:\ Prompt,  type
    asset  /s  xxxxxxx    the x's represent the service tag you are setting. Note the spaces, and when you are sure it is correct, press enter. Get it right the first time as you only get one shot.  To set an Asset Tag, use this command      asset  xxxxxx
    To set an Owners Tag, use this command    asset  /o  xxxxxx    If you use your name, it will show on the Splash Screen on bootup
  • Sidpaul

    28 Posts

    593

    0

    Posted August 28th, 2005 03:00

    hey thnx man for the link, but on booting with dos and using the asset utility it said that my dell is not supported..
    any clue as to why?
  • leduke30

    2 Intern

    •

    4033 Posts

    593

    0

    Posted August 28th, 2005 04:00

    Try this one. It says for the C510/610, but that is just for the Suspend files; it has an updated Asset.com and a friend used it to reset his Service Tag on  a Latitude X300, when the earlier version would not work for him either. If that does not do it, send me a Message with the Service at the page top. It will be tomorrow before I answer.
  • leduke30

    2 Intern

    •

    4033 Posts

    593

    0

    Posted August 28th, 2005 17:00

    it should only take few seconds. Check your private messages at page top later on.  I assume you pressed enter after typing the command at the A:\ prompt?

    Message Edited by leduke30 on 08-28-2005 01:39 PM

  • Sidpaul

    28 Posts

    593

    0

    Posted August 28th, 2005 17:00

    hey thnx a ton for ur reply. downloaded the file and burnt it on a bootable cd as i dont have a FDD on my 700m.

    after booting i started asset.com just as u said(asset /s xxxxxx) but nothing happened. it just had the insert ccursor blinking for like 5mins no activity...so fearing something mite go wrong i just restarted the laptop. it did not put the service tag in my BIOS...

    how long does it take???

  • Ed C

    2 Intern

    •

    3247 Posts

    593

    0

    Posted August 28th, 2005 17:00

    Please Call Dell Tech Support and have them FIX it. If you get the service tag entered into the BIOS and you do set a password on it you might be out of luck if the password ever gets corrupted.