UNSOLVED

bluebsh

updated

22 years ago

Closed

B

bluebsh

1 Rookie

•

84 Posts

0

75147

June 18th, 2004 23:00

A30 messes up brightness levels on Inspiron 5100's

Hi..

I must say I am very mad right now at dell tech support... My friend just had her keyboard replaced and dell tech support told her to flash her bios to A30 of course they told her how to do it and it did it correctly, but as of the flash taking place the brightness keys no longer work! and the brightness settings in the BIOS setup (F2 at boot) do not work either! her screen is fixed at a high brightness and will not change now after the upgrade... so to see if this was the problem (at first i thought they put in a bad keyboard) I flashed my BIOS on my 5100 also to A30 from A29 and now my brightness function keys will not work in DOS or Windows at all, and it will also not work in the BIOS setup either! this is rediculous, this needs fixed immediatly! mine seems to be locked at a brighness so low i can barely read it and her's seems to be locked at max brightness and she can not stand it... my system is pretty much non function because of the inability to view the screen good.... what the heck can be done about this?

my service tag is: 41TCL21 which is under warrenty for full service

her's is: 3SF1J31 which is not under warrenty anymore and she paid for the keyboard problem to be fixed and they just created another problem! I think her problem should be corrected for no charge due to the fact it was dell that created the new problem. could dell support please contact me on this? thanks

  • Allowiches

    97 Posts

    954

    0

    Posted June 18th, 2004 23:00

    Download a previous version of the Bios, A29, and flash back to it.

    Message Edited by Allowiches on 06-18-2004 07:28 PM

  • bluebsh

    1 Rookie

    •

    84 Posts

    954

    0

    Posted June 18th, 2004 23:00

    dell still needs to correct the problem though in the new flash bios update
  • Allowiches

    97 Posts

    969

    0

    Posted June 18th, 2004 23:00

    I am sure once they hear of the problem they will try to resolve it. 
  • darrin99

    520 Posts

    969

    0

    Posted June 19th, 2004 21:00

    A30 has hasn't done anything to the brightness of my i5100. The controls still function normally, and the brightness hasn't changed.
  • bluebsh

    1 Rookie

    •

    84 Posts

    969

    0

    Posted June 19th, 2004 21:00

    I've tried this on 10 Inspirion 5100 laptops (1st generation of them) that have been upgraded from A02 bios all the way up to A29 then A30 and they all display the same problems.

    After installing A30 over A29, the screen's brightness is locked in place and the brightness controls will not change the level of brightness on the screen. I don't know about the 5100's they sell now, but the ones ive tried it on so far are from when they first started selling the 5100's, and the all do the same thing.

    After reverting back to A29 on all them they all function properly again.

  • brianhe

    5 Posts

    969

    0

    Posted June 19th, 2004 21:00

    I can confirm this is a problem, tried it on my Inspiron 5100 and had the same brightness level problem in bios and in windows... the keys just simply will not function after installing a30 flash upgrade... and it will not work in bios setup either
  • darrin99

    520 Posts

    969

    0

    Posted June 19th, 2004 23:00

    I don't know what to tell you. The brightness controls work fine on my 16 month old i5100.
  • LICHE1908

    313 Posts

    969

    0

    Posted June 20th, 2004 03:00

    I tried the Bios upgrade A30 and it disabled my brightness keys, I had to revert back to A29 version. My 5100 was one of the original models made in March of 2003.
  • johnallg

    2 Intern

    •

    7280 Posts

    969

    0

    Posted June 21st, 2004 19:00

    For those who loose brightness control, have you reset factory defaults after flashing to A30 to see if the brightness then works?
  • bluebsh

    1 Rookie

    •

    84 Posts

    711

    0

    Posted June 21st, 2004 20:00

    no changes after doing a factory reset on the settings...