UNSOLVED

Myrialevrool

updated

12 years ago

1

42162

February 10th, 2015 09:00

XPS Touch from US to Europe?

Hi, I am moving to Europe. Can I take my Dell XPS ONE 2720 touch with me? Do I need a converter for the 220V to 110V  conversion? How about the 50 Hz over there?

  • 1169

    0

    Posted February 10th, 2015 09:00

    The cord plugs in directly. No power block unfortunately. And there is absolutely nothing on the back, the side, underneath, on the box or elsewhere which indicates the power it would tolerate. I absolutely checked everywhere. I was not able to find a direct customer support email at the Dell homepage. Just this forum. Is there a direct line to Dell somewhere? Would be happy to mail them the serial no. and all to get an answer by the company directly to be on the safe side.

  • speedstep

    11 Legend

    •

    46969 Posts

    1169

    1

    Posted February 10th, 2015 09:00

    Does this model use a Laptop Brick that takes 100 to 240v AC  50/60 Hz ??? or does the cord plug in directly.  UK plugs are big as your fist to IEC C5 (Mickey Mouse) or C13.

    Dell power bricks would need a mickey mouse to Schuko cable.

    CEE7/7 Schuko standard Euro 3 pin down angle plug to IEC C5


    It should be marked on the back that it takes 100 to 240v AC  50/60 Hz if it uses a standard NEMA power plug.

    If there is no power brick you would need is a German CEE7/7 Schuko standard Euro 3 pin down angle plug to IEC C13 Power cord.

  • speedstep

    11 Legend

    •

    46969 Posts

    1169

    0

    Posted February 10th, 2015 10:00

    It has to have that info along with UL and FCC info clearly marked on the OUTSIDE. The service tag and serial number are also clearly marked.

    The label on the unit's power supply also clearly states

    INPUT 100 - 240VAC  50/60Hz 

    XPS One 2720 260W PSU
    Dell P/N : 9T4G0

    Same in Specs so you need a German CEE7/7 Schuko standard Euro 3 pin down angle plug to IEC C13 Power cord.


     

    XPS One 2720 260W PSU
    Dell P/N : 9T4G0

    XPS One 2720 260W PSU
    Dell P/N : 9T4G0

     

  • 1169

    0

    Posted February 10th, 2015 11:00

    Thanks a Million! The label indeed was UNDER the base of the foot! The only place I haven't had a look so far! Very well hidden. And yes, hurray! it will work in Europe. Thank you so much!

  • 1169

    0

    Posted February 10th, 2015 11:00

    So these are the only two labels on the outside. To check the power pack I need to remove the back and check - right?

  • speedstep

    11 Legend

    •

    46969 Posts

    1169

    1

    Posted February 10th, 2015 11:00

    I would edit and remove those pictures.

    Its listed in the spec and on the power supply for this unit that its 100 to 240V

    You just need a new power cord.  You have to click the right arrow and have flash in the specifications PDF to get to the power rating 100-240v

    You may see the labels im looking for on the base of the foot if you lay it down on a pillow or something so you dont break it.

     

  • 1169

    0

    Posted February 10th, 2015 11:00

    thanks!