UNSOLVED

kill_dash_nine

updated

18 years ago

0

8569

August 12th, 2008 05:00

XPS 720 OCZ Memory Problem

I recently upgraded to 64 bit Ultimate and threw 4GB more RAM in my XPS 720 system, for a total of 8GB.  I purchased the original 4GB maybe 4 months ago and decided to buy the other 4 just recently.  I made sure that the serial numbers were exactly the same (OCZ2RPR800C44GK).  The original 4Gb ran @ 800 mhz, but now with the 8GB, they run at 667.  Any ideas?  ANything I need to enable/disable?

 

Help is greatly appeciated.  According the CPU-Z the DIMMS are slightly different.  Can I force them to run at 800?

 

  • Davet50

    6 Operator

    •

    14442 Posts

    139

    0

    Posted August 12th, 2008 13:00

    What is the version numbers on the Stick??

    I ran into a simular situation with my 1 gigs bought 2 gigs in oct of 07 after the mb change out and another 2 in Feb 08... All from Newegg with the same pn however upon further examination it was noted the revs were different. Ended up being the SPD were not the same.

    I worked with the great guys over at OCZ and they develped new SPD's that enabled the stick to all run the same.

    I would very strongly suggest you go over to their web site and post the isssue. Someone will help you and get it all straightend out.

     

    Only thing I can suggest in the mean time is to using ntune or the nvidia ESA software go into the advanced bios setting page and ensure on that page that any listing for Spread Spectrum is set to disabled.

  • cd60

    289 Posts

    139

    0

    Posted August 13th, 2008 02:00

    Go into the bios and go under the memory section. You want to make sure that the EPP/SLI setting is enabled.