
UNSOLVED
XPS 410 Recovery Partition with VISTA
I just received a new XPS 410 with Vista installed. Just wanting to get familar with features before start using the system much and transfering the files.
I see one feature is the System restore using CTL F11 on power up. I can not get this to work. I can see the partition is there, not sure if its suppose to show but on my system I have a C and D. D is the Recovery Partition and near as I can tell.
Thanks
Tom
Responses (9)
Solutions (0)
Uncle Ripper
591 Posts
340
0
Posted February 6th, 2007 01:00
Dn't know about Vista. Don't know why dell would change it. The blue bar is at the top.DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
340
0
Posted March 16th, 2007 16:00
TomXPS,
F8 should bring up the Startup Menu, which is not the same thing as our ctrl-F11 PC Restore menu.
DELL-Chris M (old account)
#IWork4Dell
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
340
0
Posted March 16th, 2007 18:00
PC RESTORE WITH DELL INSTALLED VISTA -
* Power the PC off
* Disconnect all devices except for the following:
keyboard
mouse
monitor
speakers
* Power the PC on
* On restart, right after the BIOS splash screen, you should see a 1/2" blue bar at the top of the screen. When you first see it, tap the F8 key on the keyboard
NOTE: If the Windows Advanced Options menu does not appear, restart the system and try again
* Press the Down Arrow key to select Repair Your Computer
* Press the Enter key
* The System Recovery Options window appears
* Select your language
* Click Next
* Log in as a user with administrative rights and click OK
* Click Dell Factory Image Restore
* The Dell Factory Image Restore window appears
* Click Next
* Check Yes, reformat hard drive and restore system software to factory condition
* Click Next
* The factory software image is now written to your hard drive
* Click Finish to restart the computer
PC RESTORE WITH DELL INSTALLED XP -
* Power the PC off
* Disconnect all devices except for the following:
keyboard
mouse
monitor
speakers
* Power the PC on
* On restart, right after the BIOS splash screen, you should see a 1/2" blue bar at the top of the screen. When you first see it, press Ctrl+F11 key on the keyboard
NOTE: If the Windows Advanced Options menu does not appear, restart the system and try again
* Click the Restore button. A caution message appears advising that all data will be lost
* Click the Confirm button. The progress window appears
* When the restore is complete the message, The system recovery process was successful appears
* Click the Finish button
* The computer will restart
WHAT CAN CAUSE PC RESTORE TO FAIL?
- If the hidden DSR (Dell System Restore) partition is removed
- If the MBR (Master Boot Record) is modified in any way (such as if you load the Vista Upgrade over XP)
- If the you change the MBR but the pointers to the DSR partition are left, the DSR will boot, detect that the MBR has changes, and flash a screen that informs you that the MBR has changed and that image restore will not run
- If you create additional partitions, changing the MBR, Dell PC Restore will be disabled to prevent it from overwriting these partitions that may contain critical data during a restore operation
- If you add a second SATA drive and migrate to a RAID array using the Intel applications accelerator in windows, running PC Restore will put the image back on C:\, but the system will not boot since the boot sector is looking for the ATA driver (factory image) and the bios is looking for the RAID driver (migrated configuration)
If any of these occur, you cannot set the system back to Factory condition. You must manully load the operating system, drivers, and all application software.
Message Edited by DELL-ChrisM on 03-16-2007 02:26 PM
DELL-Chris M (old account)
#IWork4Dell
- Hi ChrisM,
I just recovered my CTRL+F11 function in order to enter the DELL/Symantec Recovery System. I have used the procedures of Mr. Dan Goodell's http://www.goodells.net/dellrestore/ and was able to bring back the CTRL+F11 functionality after fresh installing WinXP. But i want to bring back the "factory" settings of my laptop and just delete the bloatwares in it.
This is what I did:
1. Hit CTRL+F11 and entered the Dell/Symantec Recovery
2. I used the "Recover using a legacy Ghost image
3. Performed just like steps 2-9 at www.goodells.net/dellrestore/manualrestore/.
4. Upon clicking Local, Partition, From Image... it gave me this error:
Internal Error 36000. An internal inconsistency has been detected. If this problem persists, contact Symantec Technical Support at http://service.symantec.com
I'm feeling that i'm getting close in restoring my laptop to its original factory settings until this error came up. Hope there is still a solution for this error.
My ghost image file in the hidden partition is still intact. My most concern is bringing back my laptop to its "factory" original content.
Thanks for all the help in advance.
Jojit

Uncle Ripper
591 Posts
340
0
Posted February 4th, 2007 16:00
Message Edited by Uncle Ripper on 02-04-2007 01:23 PM