UNSOLVED

fitzger100

updated

15 years ago

0

16623

June 17th, 2011 10:00

XPS 240 won't boot - can't get into setup to troubleshoot.

I have my XPS 420 for years without any problems.  All of a sudden when I turn it on I just got a black screen!  I checked the diagnostic  lights (1,2,3,4) to see if I was getting a trouble code..  Nothing..   Tried several times and still nothing.  It showed power was on (green light) and the tiny screen on the top of the case looked normal (to show photo slides)..  There is no way to get into the CMOS setup up because it won't boot to give me that option.  This went on for a few days while I tried to research this problem..  Disconnected the drives and reconnected, Took out the memory and reinstalled to be sure they were in securely. Tried putting in a Windows 7 CD but it won't boot to the CD..   I was at a complete loss to understand what had happened..   This morning I tried it again and for some strange reason, this time I did get the diagnjostic lights (1.2.3 & 4) all lit with a message on the small miniview screen stating that: "It does not recognize one or more ata drives"  and still getting a black screen on the monitor.   Is there any way I can get this to boot into the setup menu?

This is what I have: (below) and I'm running Windows 7

0

01323

INFORMATION..., NO ITEM

1

DN004

Assembly, Heatsink, PRFMC Shroud, MATRIX TANK DESKTOP...

1

JR064

INSTRUCTION..., DEV-CHAS L6 TO L5.5, 375W

1

HR749

ASSEMBLY..., CHASSIS..., PWA INTEGRATED..., 375W, EXTREME PERFORMANCE SYSTEM..., 420

1

WU126

Processor, QX9650, 3.0, 12MB Yorkfield, C0

1

5120P

Cord, Power, 125V, 6Feet, SJT..., Unshielded

1

XK433

PLACEMAT..., GETTING STARTED..., EXTREME PERFORMANCE SYSTEM..., 420, DAO/BCC

1

KU170

Pad, Mouse, Metal, Image Works Mfg Inc, Extreme Performance System

1

DJ331

KEYBOARD..., 104, UNIVERSAL SERIAL BUS..., UNITED STATES..., ENTRY..., LITEON..., BLACK...

1

CM250

Kit, Software, Adobe, Premiere Elements, 4, W#1, XPS420

1

CM500

Kit, Software, Trend Micro, 14.7 English

1

DC094

Assembly, Cable, Serial Ata Optical, Matrix, smith, mini Tower

1

DJ301

Kit, Mouse, Universal Serial Bus, 2BTN, Optical, Lead Free Black

1

GU184

Hard Drive, 750G, S2, 7.2K, 16M Lead Free, SGT-GL

1

GY530

Kit, Software, Adobe, Soundbooth CS3, Digital Video Disk Drive DIXV

1

HT074

TECHNICAL SHEET..., ADOBE..., CONTACT...

1

HX425

Kit, Software, Overpack, VHP32 A01, Digital Video Disk Drive England

1

JP034

Assembly, Cable, STARDUST TANK/Matrix, Smith, Mini Tower

1

RR354

Assembly, Blu-Ray Rewritable, 4XPLDS, Half Height, DVD+/-RW...

1

DU219

Assembly, DVD+/-RW..., 16X, NEC Corporation, Serial ATA, Black

1

PN182

KIT..., Software, Works, 8.5 English

1

R109C

Kit, Software, Turbine, Lord Of The Rings, Extreme Performance System, DELL AMERICAS ORGANIZATION...

1

RR268

Display, Flat Panel Display, 22 SP2208WFP, Silver, Dell AmericasOrganization

1

RU297

Kit, Card, Network, DocumentationAntenna, Screw Assembly

1

TK208

Card, Wireless, Network, DW1505 Full Height

1

UH837

Kit, Speaker, 12V, AS501, Nmb Black

1

WP376

Kit, Software, Adobe, Photoshop Elements, 6, Compact Disk Drive England, DIXV

1

WU804

Kit, Software, PowerDVD, 7.0 Blue-Ray Disk Playback, 7.0-05

1

WX085

Card, Graphics, 128, 2400 Professional, MRMGA11

4

XG700

Dual In-Line Memory Module 1GB, 800, 128X64, 8, 240, 2RX8

Any suggestions are welcome..

 

  • speedstep

    11 Legend

    •

    46969 Posts

    397

    1

    Posted June 17th, 2011 10:00

    Multiple issues.  Disconnect hard drive and see if you can get post error.

    If the drive is bad then you need to get a new one and reinstall.

  • 397

    0

    Posted June 17th, 2011 11:00

    Thanks for your response.   I'm not at home now, but will try your suggestion and get back to you.

    Again, Many thanks..

    Tom

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    397

    0

    Posted June 17th, 2011 13:00

    Dead motherboard battery?

  • 397

    0

    Posted June 18th, 2011 13:00

    Thanks to all  for the suggestions.   When I got home I disconnected the drives to see if I'd get a post..  Sure enough I did.  I did a diagnostics run and everything passed(except for the drives of course..)   Reconnected the drives and for some strange reason everything worked normally!   Had me a little nervous for a while..  

  • gimilt

    2 Posts

    397

    0

    Posted June 19th, 2011 10:00

    I feel like I should mention that I had a similar problem with my Dimension E520, the only difference being that I had diagnostic lights 2 and 4 lit up.

    I also followed the advice above, and got the same result - I didn't change anything, but it's working fine now.