UNSOLVED

wesd

updated

22 years ago

W

wesd

64 Posts

0

21053

January 27th, 2005 01:00

WHEN WILL THEY GET A NEW CASE FOR THE 8XXX series?

Just wondering if anyone had an idea when a new case for the 8400 or it's successor will be coming out.  I would like to get a new Dell desktop but don't want the same clamshell case, plus I would like to get a new look.  Does anyone have ideas?

Thanks.
  • shesagordie

    12 Elder

    •

    46017 Posts

    670

    0

    Posted January 27th, 2005 01:00

    wesd.

    Dell keeps this information quite and you will only know the day it appears.  The newest case released, is the D5000 and that's not being sold in the US.

    Bev.

  • cyber_surfer

    551 Posts

    670

    0

    Posted January 27th, 2005 09:00

    You might consider building your next computer. You then have 100s of cases available to select from, on board temp sensors, off the shelf repairs and upgrades.

    The cases range from awful to great and flimsy to you can stand on them. The cooling can be as flexible as you desire and the sound generated can be minimized or be a roar of cooling for your overclocked gamer.

    You can determine your own upgrade flexibility and the source, quality and price of every component from the power supply to the MB, memory, CPU, hard drives, optical drives, sound source, etc.

    A side benefit is when you are up and running no problem with your machine will require any one but you to solve it. No waiting on the phone. No luck of the draw on the support you receive. You are available 24 hours/day and totally dedicated to a successful conclusion to your problem. Of course you are not alone with all the forums, knowledge bases and freeware available 24 hours/day.

    Just another option to consider.

  • wesd

    64 Posts

    670

    0

    Posted January 27th, 2005 11:00

    cyber_surfer

    I've built my last couple PCs before I bought the Dell.  I think the main hassle now with building  a PC is the software; the hardware is cheap but the software is $$$.  I prefer to build my own servers still but I find that the Dimension 8xxx series is a good compromise between homebuilt power/low maintenance.  I've never had any problems with either of my Dells and I'm going on three years for the Dimension.

     

     

  • talmy

    1034 Posts

    670

    0

    Posted January 27th, 2005 14:00

    The BTX-based systems, such as the Dimension 5000, have new cases. Currently this is only available in Europe. I'd expect a similar revision of the 8000 series, but it still might be a clamshell.
  • mdl207

    1 Rookie

    •

    61 Posts

    670

    0

    Posted January 28th, 2005 00:00

    hmm...i personally like the case design

    nice and simple!
  • rschmitt

    1 Rookie

    •

    136 Posts

    670

    0

    Posted January 28th, 2005 01:00

    I just purchased a new Gateway with the new BTX case and it's great. Very quiet and lots of room inside. This case is very easy to upgrade also. The fans run at half speed and you don't hear anything. The BTX cases have been very slow coming to the market by the big computer makers. It's a great improvement.

    I also got 2 4700C's so I'm really a Dell man but this new Gateway fit the need back a month ago when I needed to replace one of you computers.
  • jayunsplanet

    2 Intern

    •

    199 Posts

    670

    0

    Posted January 28th, 2005 01:00

    If you like the Dell package and like a 3rd party custom case, why not just put that dell in a custom case? And yes, it can be done successfully. However, the warranty may be voided and tech support may also be voided.
  • wesd

    64 Posts

    670

    0

    Posted January 28th, 2005 02:00

    Thanks for the info about the Gateway, I look into that.

    I truly hope that Dell changes their case soon.  The reason?  I like the clamshell design but the 8200 case is so heavy, there is too much plastic, and it has looked the same for 4 years.  I'm the kind that when I buy a new computer, I want it to look different than the one I replaced.  I've considered getting an XPS just for this reason.   It's impossible to tell the 8200 from the 8300 and 8400 unless you look at the medallion around the power button and then you almost need a magnifying glass.

    You wouldn't go buy two new cars four years apart that looked exactly even if it had a different engine would you?

  • talmy

    1034 Posts

    670

    0

    Posted January 28th, 2005 03:00



    @wesd wrote:

     I'm the kind that when I buy a new computer, I want it to look different than the one I replaced. 



    This is nothing that a can of spray paint can't fix. :smileyhappy:
  • Canucker

    1 Message

    356

    0

    Posted January 28th, 2005 03:00

    Wesd, I understand how you feel seeing as I also want to replace my 8200 and do not want another Dell with the same case and antiquated cooling systems (loud) they presently have in their 8400 and XPS line.

    I checked out Gateway’s web site and I must say the 7200XL BTX based system seems like a much better way of cooling a system then the present ATX method. The question is why doesn’t Dell have a BTX based system yet.


    Dell Dimension 8200
    P4 2.53GHz
    512 MB RDRAM
    ATI Radeon 9800PRO 128 MB
    TB Santa Cruz
    Windows XP SP1