
UNSOLVED
Quad monitor support on Precision 670?
Does anyone know Precision 670 supports quad DVI monitors using 2 Nvidia Quadro 3400's? I am hoping one can be plugged into the PCI x-16 slot and the other can go into the PCI x-4 slot?
If not, is there any way to get quad monitor output using the 670 (with 3d acceleration)?
Responses (5)
Solutions (0)
madjoker98
5 Posts
499
0
Posted September 24th, 2004 09:00
Hello, I am an owner of a Precision 670 with the Nivida Quadro FX 3400 PCI Express Card. I think one card support will support 4 monitors. I have two monitors hooked up right now one hooked up to each DVI connector, and when I go into Device Manager and go to the Display tab... It shows 2 extra monitors to make a total of 4. I beleive all one would need to do is buy two Y shaped DVI/VGA splitters and hook up the additional 2 monitors. I've even tried to delete the unused monitors, however they return after I restart my computer. I can find any problem with them being there.. So, I'm assuming they are there for a reason. Also, I belive I read about it somewhere as well. Might want to send an email to Nivida or check their website.
As for your question of hooking up two Nivida 3400's dell system... Again I believe it is possible with one card in the PCIx x16 slot and one in the PCIx 4 slot. I know it was possible on the SuperMacros Tumwater motherboard. Again, I am not sure... you'll have to do some digging.
Greetings:
I'm banging my head against the wall on the same problem. The FX3400 slot cover takes up two slots preventing the use of the only PCI connector on the board. From the information I have gathered you can use two DVI to VGA splitter cables but you will receive identical pictures on each set of double monitors. I'm trying to find out if one of the three PCIX connectors or the PCI Express x 8 (runs at x4 only) connector will work to install another double head PCI Card. I've heard that you can use a PCI card on a PCIX connector. According to Dell technical help you can't. That is the problem I'm not that knowledgeable about computers so I go to the people who are and get conflicting advice.
If you get any new information on this let me know.
Also try Realtime.com and there UltraMon software information on multiple monitors.
I think you need to have a PCI-Express X16 connector to install the FX3400. But don't use my opinion I'm as green as you get when it comes to computers
Thanks
Abyss1

speedstep
11 Legend
•
46969 Posts
499
0
Posted September 19th, 2004 00:00
http://www.realtimesoft.com/multimon/reviews/xentera/
http://www.colorgraphic.net/newsite/misc/home.asp
The Xentera GT Series is made up of 6 different cards ranging from two to eight display support. The GT4 is a Dual Radeon 9000 Card.
http://www.colorgraphic.net/newsite/products/xentera_gt4_models.asp
Matrox G450 G45X4QUAD-B 128 MB Graphics Card
http://tomshardware.bizrate.com/marketplace/search/search__cat_id--405,prod_id--7791467.html
Message Edited by SpeedStep on 09-18-2004 09:24 PM