UNSOLVED

cyapony

updated

17 years ago

C

cyapony

2 Posts

0

83846

July 14th, 2009 03:00

Precision 690 power supply question

I am trying to figure out if the motherboard for the precision 690 750W and 1kw systems are the same so I can upgrade to the 1kw power supply which was an option but I was stupid and didn't get it. The part number on my mboard is MY171. I currently have the 750w and it is going bad. I can get a free one from dell but I want the upgrade. I bought the system in August 2007. I am looking to add another chip, 8-16gb ram, and a bigger harddrive. I don't know a lot about power supplies. Are there any other things I should consider or worry about by using the 1kw? Or should I just replace the 750w?

Here is my current setup:

Precision 690 750w power supply, XP64 os, single quad core zeon E5345, 2gb ram, nvidia quadro fx4600 graphics card, 350gb and 2 80gb 10k hard drives, CD drive and DVD drive, and a wireless card

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1601

    0

    Posted July 14th, 2009 07:00

    cyapony,

    The Precision 690 with the Xeon Woodcrest only used one motherboard - JT008 Motherboard Service Kit for Woodcrest CPUs.


    DELL-Chris M (old account)

    #IWork4Dell

  • cyapony

    2 Posts

    1601

    0

    Posted July 14th, 2009 14:00

    Then why did someone is spare parts tell me otherwise? He said they were different and it could damage my motherboard and chip if I used the 1kw.

    So I can use the 1kw with no problem then?

  • mantamorfin

    12 Posts

    1601

    0

    Posted April 19th, 2012 09:00

    i have a precision 690 xeon  it had a 750w powersupply it now has a 1kw supply and ive been running it for 3mths with out any thing going wrong they are the same as far as i can tell

  • 1601

    0

    Posted April 20th, 2012 17:00

    To tack on this post, I am trying to upgrade my 690 to a 1000w (n1000p) and two PS units in a row aren't working.  I get power 1 and power 2 connected and when I plug i the PS I can see the memory fan twitch, but nothing more.  Power button doesn't do anything.  If I plug the old 750w back in everything comes to life.  So I know the machine is still fine, but is there anything in particular needed to make the conversion from 750 to 1000?

  • mantamorfin

    12 Posts

    1601

    0

    Posted April 22nd, 2012 08:00

    hi

     when i swapped over to a 1kw powersupply  the idea was to use a pair of risers so i could use 12GB memory but the fans made so much noise i decided not to bother.

    everything was just plug and play the only hiccup i had was the power to the hard drives was routed behind the motherboard originally so i had to re -do the wiring which was unplug type and not a big issue.

    so i cant see what your problem could be, 

     its deffo the one suited to the precision 690 (ha ive just checked out a web page and it says its compatible with see below)

    Compatible Model (Dell Precision 690,T7400)
                                 ( DELL  XPS 700,710, 720 )      
      this is wrong im having the same trouble,

     i have a xps 720 desktop and im trying to use my spare (precision 690 powersupply) and it wont power-up ive spoke to a guy at dell and we talked on the phone for 50 mins ,going over the problem i was having and he had not come across this before we came to the conclusion .....the pin outs on the powersupplys are slightly different i have checked this out and its right i compared the  T7400 and the xps720,
    i did this because the 690 dose not have a pin code on the powersupply on the dell site.
     the precision 690 and the xps 720 pin outs to the power 1 and power 2  connector on the motherboards (p1 and p2 ) are different  ive just bought a genuine 750w  xps powersupply because im sure this if the answer but i wont know till it arrives.
     if you want to chat about this problem because its doing my head in too please get in contact via phone or email  < ADMIN NOTE: Email ID removed per privacy policy>