UNSOLVED

zestyllahma

updated

22 years ago

Z

zestyllahma

30 Posts

0

10942

March 25th, 2005 18:00

Need details on Dell's 250w PSU. Amperage for 12v rail?

I recently purchased an nVidia 6800 GT video card that is severly underperforming in games. It isnt a stability issue, its just extremely slow for the amount of money spent. Ive exausted and tested many possibilities for this problem and have come down to the PSU being underpowered. But knowing the exact amperage of the 12v rail would answer that question. Does anyone know how I could go about finding this information? The customer service guy didnt seem to have a clue to what I was even talking about.
  • GideonD

    57 Posts

    396

    0

    Posted March 25th, 2005 19:00

    I just looked that up myself not long ago. I believe its only 14A on the +12V Rail. Lowsy isn't it? I'm about to put a 6600GT in a 4600. I hope it works alright myself. If you want a big power boost and don't mind paying primo for it pcpowerandcooling.com has a 425W unit designed to fit the Dell systems. I think it has a 20A rating. It's $150 though. Depeding on what model you have you may be able to fit a normal ATX PSU in it for a lot less.
  • Daddyjaxx

    1081 Posts

    396

    0

    Posted March 25th, 2005 19:00

  • herb366

    1517 Posts

    396

    0

    Posted March 25th, 2005 21:00

    That guy was wrong. The Dell 250W psu never had a 12v rail with 12A. It has either been 10A or 14A. As a matter of fact, Dell has used three different 250W power supplies. There are two differnt models with the 14A 12v rail. One says 3.3v and 5v shall not exceed 150W. The other says 3.3v and 5v shall not excedd 135W. I've done some research into the 250W psu and might post it separately. Maybe this is why people get different results.
     
    As for finding this information, go to Product Support at the top of the forum. Find your model and go to Technical Specifications.

    Message Edited by herb366 on 03-25-2005 06:38 PM

  • GideonD

    57 Posts

    396

    0

    Posted March 25th, 2005 21:00

    That's where I looked it up for a 4600, which is a relatively new model, only about a year old. Listed 14A on the +12V.
  • jankerson

    2843 Posts

    396

    0

    Posted March 25th, 2005 23:00

    Your Power supply isn't powerful enough @ 250W Period. It is being badly overloaded with the video card you have.
  • zestyllahma

    30 Posts

    396

    0

    Posted March 26th, 2005 03:00

    Thanks for the feedback guys, I cant seem to find the exact spec in the User guide but I doubt its above 14A. Either way do you think this is holding back my 6800 GT somehow? The biggest thing to me is I dont have any major stability issues that would indicate a power issue. Lockups, freezes, artifacts...nothing. The one thing that does seem odd is when I start up my system the fan of the video card is twice as loud as normal for about 10-15 seconds while XP is loading up. It quickly calms down to normal afterward. I dont know what to make of that.

    That said from a stability standpoint everything seems fine. The only problem I have is my frame rates are about 30-40 FPS less than what I should be getting with this card and my system. Could a lack of power be attributed to lessening the performance of the video card, even if by all accounts the system is perfectly stable otherwise? Thats my biggest question before I decide to spend $150 on a new PSU. Its either the root of the problem or it isn't.

    One more quick question about the pcpowerandcooling custom Dell PSU's. How are they modified for Dell systems exactly? Would they be compatible in a seperate non Dell system in the future (in case I end up moving on to a self built system Id like to be able to keep the $150 PSU)?
  • sparke63

    43 Posts

    396

    0

    Posted March 26th, 2005 05:00

    Here is a new one for everyone. Dell replaced my motherboard and ps 11-19-04 under extended warranty. What I got was +12v@16a, +5V@22.0A, +3.3@18A. I just put in a Pc Power and cooling Turbo-cool 425 deluxe power supply today. It has +12v@20a, +5v@40a,+3.3v@40a. I was just tired of worrying about it after having one fail and reading hundreds of post with the same issue. And yes mine was born Oct 2003. 
        
              Mark