
Solved!
Go to SolutionResponses (5)
Solutions (0)
This motherboard is off a Studio XPS 9100 system. I was wondering if there are supposed to have a capacitor on each of the empty rings. I had an USB 3.0 Host Controller that comes with the system on the PCIe x8 but I have removed it because a lot of so called cold start BSOD links to the PCIe hardware. True enough all the PCIe express BSOD stops after the card removal. An answer will be greatly appreciated. Thanks.
DELL-Roshan L
6 Operator
•
4433 Posts
498
0
Posted May 18th, 2013 03:00
This thread has been locked due to inactivity.For assistance,with same issue or a different issue,please click New Post on the top right to start a New Thread.

RoHe
12 Elder
•
45230 Posts
•
172625 Points
498
1
Posted October 5th, 2012 11:00
Here's a picture of the motherboard from the Ascendtech site. You can see that it has 5 black capacitors and one silver with blue stripe in same relative orientation as on yours. So I don't think your board is missing anything either.
BSODs with that PCI-e card could be because the card doesn't play nicely with the PCI-e controller in your system. There are several versions of PCI-e and it appears that not everybody has followed the standards to make them all work together.