
UNSOLVED
J
JasmineHill
2 Posts
0
14572
February 20th, 2000 17:00
Looks like Safe-Mode...
Hi,
My system looks like it is running in 'safe-mode'.
(large icons, 16 colors, etc) I have restarted my system over and over selecting 'Normal' mode every time, but it always comes up in 'safe'.
I have tried restoring the color to 265 in the
'display'-'settings' menu, which tells me to restart the computer, even though I have selected the 'Apply changes without restarting' option.
When I restart, I choose 'normal' and it runs in 'safe'. Is it a driver problem? Did someone set 'safe' as my default? How do I fix it?
thanks,
Jason
My system looks like it is running in 'safe-mode'.
(large icons, 16 colors, etc) I have restarted my system over and over selecting 'Normal' mode every time, but it always comes up in 'safe'.
I have tried restoring the color to 265 in the
'display'-'settings' menu, which tells me to restart the computer, even though I have selected the 'Apply changes without restarting' option.
When I restart, I choose 'normal' and it runs in 'safe'. Is it a driver problem? Did someone set 'safe' as my default? How do I fix it?
thanks,
Jason
Responses (5)
Solutions (0)
JasmineHill
2 Posts
420
0
Posted February 20th, 2000 20:00
Hi,
Thanks for your help.
I tried everything you suggested, and nothing is working. To better explain, the computer is not actually in safe mode, only 16 color. A friend who works at a computer store suggested that I just reinstall windows, or set it back to factory with the disk, but my boss doesnt want to do that, b/c we are networked and then we have to get someone to come remap the network drive, and we'd have to reinstall all of the added software we use.
I fixed the icons to normal size, now its just the color thats angering me.
Thank you,
Jason- what is the graphics card you are using?
it sounds like when you are setting your graphics adapter in the display settings something is going wrong...
Send me an email
18779713, status:
Hi Jason,
What OS are you running? I am not familiar at all with NT, so would not be able to help you much in this case. In the case of Windows 98, this sounds very much like a video driver problem, so you have reinstalled your video drivers and this did not help? I would then look into getting the most current video drivers available for your card; This might be from Dell, or it might be what's called reference drivers from the chip manufacturer who made the chip for your video card.
When this came up, had you installed any new hardware or software? Had any really horrific crashes happened? You say you have the icons back the way you want, so this means that you are getting the resolution you want? You might try taking your video display to VGA, removing the driver set you have and either reinstalling the current set of drivers, or installing a more current set.
Good luck,
Kay

Kay H
394 Posts
420
0
Posted February 20th, 2000 19:00
Hi,
I suspect your system is trying to tell you there is a very serious problem, but not such a serious problem that Windows has failed to boot.
The normal procedure when you have an unscheduled safe mode boot is to first reboot, pressing the Esc key whenver you see a splash screen appear. Write down any error messages you see, and report any unusual beeps during the POST.
Next, after the system has booted, go to My Computer | Control Panel | System | Device Manger. For each of your devices, highlight the specific device, and click Properties. You want to look for conflicts or failures (colored circles), and you want to see that each device is reported to be working properly. Next click the driver tab, then driver details. In these places, verify that a driver has been installed. If a device reports that the device is not working properly or its driver has not been installed, then reinstall the driver. Reboot the system and see if this clears your safe mode boot situation.
I'm not sure from your dsecription that you are in a safe mode boot, though--it sounds like your video display may be in VGA mode; you may wish to reinstall your video driver and see if this helps.
Good luck,
Kay