chas638

updated

13 years ago

C

chas638

30 Posts

0

56026

January 24th, 2014 06:00

Large 4tb drive for Inspiron 530

Help,

I have an Inspiron 530 with quad Q6600 processor running Win7 ultimate 32 bit and just bought a WD 4tb internal drive (WD4001FAEX). Because it exceeds the 2tb limit I can't use it to replace my boot drive but want to use for storage. Does anyone know if my motherboard supports UEFI and if they have a solution for my problem?

Thanks for your help

 

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    854

    0

    Posted January 26th, 2014 19:00

    Now I want to replace the C drive with the new 4gb drive for data storage only but when I swipe drives my computer won't start, only from installation cd. I switched the C drive back in my computer and it starts normally.

    The BCD (Boot Configuration Data) store may be on the old C drive.

  • theflash1932

    11 Legend

    •

    16255 Posts

    877

    0

    Posted January 24th, 2014 06:00

    It does not support UEFI, but you don't need UEFI if you are using it as a data drive.  UEFI is only needed to BOOT to a disk over 2TB (you also can't boot to GPT with 32-bit Windows).  There is a possibility that the onboard controller doesn't support larger than 2TB drives, but in order to get it working you 1) WILL need to convert your 4TB disk to GPT (in Disk Management - right-click [My] Computer, Manage), and 2) you likely need to update your Intel chipset/AHCI/RST driver to see larger drives.  If support.dell.com doesn't have a driver dated in the last year or two, get the latest from Intel.com.

  • chas638

    30 Posts

    877

    0

    Posted January 24th, 2014 15:00

     I have both 32 bit and 64 bit Win 7 Ultimate installation disks. It would be a lot of work but could I install the 64bit version on the new WD 4tb disk, duel boot until I get all my programs reinstalled on the new drive. Will this work? If so, how should I format the new disk?

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    877

    0

    Posted January 24th, 2014 17:00

    Booting a 530 from a 4tb drive would require special software, as the 530 does not have UEFI.

     

  • theflash1932

    11 Legend

    •

    16255 Posts

    877

    0

    Posted January 24th, 2014 17:00

    "it would be a lot of work"

    Then let me repeat ... 64-bit Windows is ONLY required if you are going to boot to a GPT disk in UEFI mode.  If you are using the 4TB disk as a data disk, then all you have to do is convert the disk to GPT (and you may need a newer driver).  If you are using it as a data disk, then reformatting with a 64-bit OS isn't necessary.

  • theflash1932

    11 Legend

    •

    16255 Posts

    877

    0

    Posted January 24th, 2014 17:00

    Oh yeah, I forgot (from my first post) which system we were talking about :)

  • theflash1932

    11 Legend

    •

    16255 Posts

    877

    0

    Posted January 24th, 2014 21:00

    No, by default the drive is MBR, which cannot be larger than 2TB.  To the left of the partitions, where it says Disk 1 or Disk 2 or whatever, right-click on the disk title, Convert to GPT.

  • chas638

    30 Posts

    877

    0

    Posted January 24th, 2014 21:00

    The drive is still raw and after reading these posts is going to be a data drive. Now to get it recognized and partitioned to work with Win7 32bit. Disk manager shows the drive divided into 2 sections, first section a little over 2tb, with both having black bars and unallocated. If I right click on first it would let me simple volume it but states for single disk. The second section is a little smaller but will only option view properties. I have Acronis 14 which shows same scenario with more options. The drive is now in an external USB enclosure. Can I format both as separate partitions and use as 2 data drives?

    I'm pretty new and this is an expensive drive, I don't want to screw it up.

    Thanks for your help and patients

     

  • theflash1932

    11 Legend

    •

    16255 Posts

    878

    0

    Posted January 24th, 2014 22:00

    Converting the disk to GPT will not format or partition the drive.  Once converted, you can create partitions and format as usual.

  • chas638

    30 Posts

    878

    0

    Posted January 24th, 2014 22:00

    Sometimes a picture is worth a thousand words. Next option is format GPT and add partitions. Will this format the whole drive and should I partition?

    Once again, Thank you for your help and patients