UNSOLVED

stevehuff

updated

10 years ago

S

stevehuff

1 Rookie

•

37 Posts

•

2 Points

0

1054

July 10th, 2016 12:00

Is AHCI possible on XPS 8500?

I have an SSD and a traditional spinning hard drive installed in my XPS 8500. The SSD says it needs to be in AHCI mode to perform a firmware update. Is this supported? BIOS has an option for SATA mode with choices ATA and RAID, Saw another post that RAID implied AHCI, but when I chose RAID I can't boot as no RAID drives are found.

Thanks.

  • beamermt79

    6 Operator

    •

    2342 Posts

    545

    0

    Posted July 10th, 2016 13:00

    Hello!  I would see if there is a BIOS update because when I looked at the manual for the XPS 8500, it stated under 'SATA Mode' AHCI or RAID, AHCI is default. Those modes are provided by the chipset regardless and it is possible they swapped chipsets during the life of the 8500, but I do not see why they wouldn't note that in the manual.

  • stevehuff

    1 Rookie

    •

    37 Posts

    •

    2 Points

    545

    0

    Posted July 11th, 2016 20:00

    My error - system is a XPS 8000, not an 8500.

  • beamermt79

    6 Operator

    •

    2342 Posts

    545

    0

    Posted July 16th, 2016 17:00

    Ahh.. Looking at the Studio XPS 8000 manual reads that no, it does not have AHCI, just IDE, even under RAID mode.