
UNSOLVED
Installing a New Hard Drive in a XPS M200s
I’m preparing to install a new hard drive in a XPS M200s using Windows 95, but don’t know how to use the floppy disks created with the Dell Program Disk Maker. The titles of these disks ‘Intel Configuration Utility’, ‘Matrox MGA Millenium PCI Video Drivers’, etc. sound like essential data is included. <ADMIN NOTE: Broken link has been removed from this post by Dell> tells how to install Windows 95, but says nothing about using the Program Disk Maker disks.
Another question: The existing drive is partitioned into three letters, It’s pretty buggy, to where a clean install is needed. The normal approach is to use fdisk, but wouldn’t it be easier to just reformat each partition, starting with the two logical partitions.
Ignore the information listed below. It applies to my other computer.
Responses (2)
Solutions (0)
NeckboneWilly
13 Posts
178
0
Posted January 3rd, 2002 19:00
Hello Jim, may I suggest once you have 95 installed and the programs, follow this :
Memory table based on total system RAM
RAM size(mb) VCache size(k) Swap size(mb)
16 4096 32
32 8192 64
64 16384 128
96 24576 192
128 32768 256
256 65536 512
(Calculate RAM/4=VCache; RAM*2=Swap)
Difference for Windows 95
Double-click on My Computer. Double-click on C: drive. Find and rename AUTOEXEC.BAT and CONFIG.SYS to something else.
Double-click directory Windows. Double-click directory Start Menu. Double-click directory Programs. Click on File à new à folder. Name it Disabled.
Double-click directory Startup, click on Edit à select all, click on Edit à Cut, go back to directory Programs, double-click directory Disabled, click Edit à Paste, close open windows.
Click on Start à run and type WIN.INI and click OK; put a –(
- in front of the "run=" & "load=" lines, click on File à save then exit win.ini.
Click on Startà run and type regEdit and click OK.
Click on the (+)'s by: HKEY_LOCAL_MACHINE à Software à Microsoft à Windows à CurrentVersion and loOK for the "Run" folder, right-click "run" à rename hit the right arrow on the keyboard (to get rid of the highlight) then put a "-" after the "run", hit enter, do same thing to "RunServices", exit registry.
Click on Start à shutdown à Restart à OK (reboot)
Go to Start à run and type in SYSTEM.INI and click OK; scroll down To the [386enh] category. at the Bottom of that category type this.
MinSPs=12
Next, scroll down till you see the category [VCACHE]. Type under it:
MinFileCache= (vcache size)
MaxFileCache= (vcache size)
ChunkSize=512
Click on File à save then exit SYSTEM.INI
Right-click My Computer à Properties and click on Performance.
Click File system and change typical role of this machine from Desktop Computer to Network Server. Click on OK.
Click virtual memory click on þ (Let me specify my own virtual memory settings).
Change both minimum and maximum from what they are to (swap size) click OK, say "Yes", click close (reboot).
Click on Start à find à Files and folders
Look in C:\ and find Files named: *.tmp, ~*.*, *.chk
Click on Find Now.
Click on Edit à select all, hit shift+delete.
Click on Start à Shutdown, choose Restart, hit "OK", You're done.
Dell Dimension 4400
1.7 Ghz
512 mb DDR RAM
80 Gig HDD
48xCdrom
CDRW
Nic , GeForce 3
Soundblaster Live
+ MORE....

Denny Denham
2 Intern
•
18798 Posts
178
0
Posted January 2nd, 2002 15:00
The disks made with Program Disk Maker contain copies of your drivers. Most, if not all, of those drivers will also be available to you on CDs received with your system or as a part of Windows 95. If they are not, you can download them from the Dell downloads site. When I reformatted my 266MHz Win95 system I did not use the floppies created with Program Disk Maker.
If the partitions on your existing hard disk (which you describe as "buggy") are only cluttered and disorganized, it will in fact be easier to simply format them than to fdisk and repartition the hard disk.