
Solved!
Go to SolutionH
hairymonster200
4 Posts
1
697
September 5th, 2016 10:00
inspiron 560 wont boot after new mobo
just relpaced mobo with brand new old stock ans it won't boot into windows 7, just goes into repair options but won't repair.
It tries to start windows, it comes up starting windows, you see the coloured logo just peek onto the screen then it reboots.
yes, it's the same model mobo.
TIA.
Responses (3)
Solutions (0)
hairymonster200
4 Posts
277
0
Posted September 5th, 2016 16:00
thanks ejn63 for the suggestion, worked a treat.
only problem I had was f2 didn't work so went in through the boot menu.
hairymonster200
4 Posts
277
0
Posted September 5th, 2016 16:00
thanks ejn63, that sorted it.
only problem I had is that f2 wouldn't work so had to go in through boot menu.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
277
1
Posted September 5th, 2016 10:00
Check the SATA operating mode for the drives -- it must be set to the same as it was before the board was replaced (AHCI, RAID, etc.).
F2 at powerup to check.