UNSOLVED

lkasgdvalkdfgas

updated

12 years ago

L

lkasgdvalkdfgas

1 Rookie

•

2 Posts

0

53056

April 30th, 2015 14:00

How to run 300w of video cards with precision tower 5810 685W power supply?

I have a precision tower 5810 with 685W power supply.  In the Tech Specs it says.

Support for two PCI Express® x16 Gen 2 or Gen 3 graphics cards up to 300W (total graphics in two slots with 685W PSU)


So you should be able to run two 150w video cards but 150w video cards all seem to need two 6pin power connecters each for a total of four 6pin power connecters for two cards.  But my 5810 only has two 6pin connecters.  And I can't find anywhere to plug in more.

  • speedstep

    11 Legend

    •

    46969 Posts

    2097

    0

    Posted May 1st, 2015 07:00

    150W cards have 1 pci-e connector, 75W comes from the X16 slot and 75W comes from 1 PCI-E connector.

     

    225W  cards need 2 which gives 150W from PCI-E power and 75W from the X16 slots.

    You cant use 2X  225W card.

  • lkasgdvalkdfgas

    1 Rookie

    •

    2 Posts

    2097

    0

    Posted May 1st, 2015 09:00

     I think I have figured out what the problem is.  

    The video card I bought says it only needs 150w of power but that is a LIE.  It requires two 6 pin connectors so it needs 225w of power connectors.  So because the video card lied about what it needed we bought a computer that can't run 2 of them.

  • speedstep

    11 Legend

    •

    46969 Posts

    2097

    0

    Posted May 28th, 2015 10:00

    The power requirement for SLI and power hungry cards is why I recommend a Corsair CS750M as a minimum spec.  Unfortunately the T5810 uses totally proprietary power supply so you have to order it with the power you need rather than go with the stock 685W unit.

    The power supply unit in the Alienware 51 with 2 X Titan cards is 1500W.

     

  • xnsuda

    3 Posts

    2097

    0

    Posted July 7th, 2017 11:00

    I don't know whether 300W graphics card(s) would be working. But I was able to make GTX 1080 work for my T5810 with 685W PSU.

  • speedstep

    11 Legend

    •

    46969 Posts

    2097

    0

    Posted July 7th, 2017 12:00

    You need the 1100W power supply to have 2 cards. And the Video cable.

    6 PIN splitter cable part number D92C9:



    Precision 5810 power supply part numbers:

    YFY1V - 425W PSU

    VDY4N - 685W PSU

    RHHKV - 825W PSU  (Not sure if the chassis is the same)

    W12Y2 - 1100W PSU (Not sure if the chassis is the same)

    You would have to check with ChrisM or someone who has access to the build spreadsheets.  They are not available anymore.

    Power supply extended card part number is M6NP2:

     

    It goes here ( this is a picture with the power supply removed ):