
UNSOLVED
E310 will not boot with 2GB of RAM
I have a E310 that I am working on and it will not boot with 2GB of ram. I get light code 2 and 4 (saying Video) but if I take out 1 stick it will boot fine (I am using 2x1GB PC2-4200 G Skill RAM). I can get it to work with 1 of the old 256 and 1 of the new sticks but after that I get that graphics error. I put the new BIOS on and unplugged all the other cards and still gives it to me.
I turned down the graphics card quality to 1meg but that doesn't help either. Any help would be great. Both sticks work in the computer by the themselves but not as a pair. I did put a new power supply in and that still isn't helping.
Tom
Responses (5)
Solutions (0)
Nikki Farrow, it would be better to start your own new thread than to post to an old thread.
Include your PC model number, Operating System (required) and what additonal memory you installed. Dell's have a history of memory compatibility and for that reason we recommend Crucial memory for 3rd party memory as it is guaranteed to work in Dell's.
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio applicationelectromagnetic
556 Posts
356
0
Posted December 24th, 2010 20:00
Hello I got the Dell Dimension 3100 and I upgrade from 512MB ram to 2GB ram.
I ordered from Crucial. It does everything for you and if your getting an error, it means the ram might be faulty or incompatible.
Try Memtest on one of the sticks of ram.
DDR2 400-MHz (PC2-3200)
DDR2 533-MHz (PC2-4300)
these are the types of ram you need.
In Cruical.com it states these might work too, faster speed.
DDR2 PC2-5300
I tried that and it came out fine. Tried more RAM, tried new powersupply hoping it was going bad and couldn't take the additional load but nothing I tried worked on that machine. New RAM did the same thing, had to tell client 1.75 was her max because I couldn't get it to POST with any more. Weird.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
356
0
Posted December 28th, 2010 11:00
The Dimension 3100/E310 supports two channels of 400/533/667 MHz DDR2 memory. Although 667 will downclock to 533. Below are the Dell memory part numbers and specifications -
C6796 1GB, DDR2, 400MHz, 128X64, 8, 240 pin, 2RX8
C6844 1GB, DDR2, 533MHz, 128X64, 8, 240 pin, 2RX8We do not have a part number for this model and 667MHz DDR2. Does the Crucial match those above specifications?
DELL-Chris M (old account)
#IWork4Dell

Nikki.Farrow
2 Posts
356
0
Posted December 23rd, 2010 19:00
I have the similar question, Anyone have got the solution? I'm still waiting for the answer, Thank you!