
UNSOLVED
C
cruisetown
1 Rookie
•
19 Posts
0
139138
July 29th, 2013 08:00
Dual Monitor wont work after upgrading to Bios A14 on Optiplex 9010 SFF
I have a Dell Optiplex 9010 SFF running a dual monitor setup via Displayport. The monitors are both Dell U2412M s (Both connected to the 9010 via DP)
I recently flashed my the Optiplex 9010's BIOS from A12 to A14. After the flash, the 2nd monitor was not able to get a connection and could not be detected. Even during POST it would remain in standby. Flashing the BIOS back to A12 or A13 rectified the problem. Both monitors were able to be detected and worked fine in Windows 8 64bit.
I believe that BIOS A14 has a bug in it and disables the 2nd DP. Does anyone else have this problem?
Responses (15)
Solutions (0)
cruisetown
1 Rookie
•
19 Posts
2524
0
Posted July 29th, 2013 09:00
Are you referring to the multi display ie Second Screen in Windows 8? Yes I did try that but Windows does not detect the 2nd monitor at all.
Or are you referring to the multi display in the BIOS. (then I'm not quite sure where that is)
Dell-Zohaib R
4 Apprentice
•
953 Posts
2524
0
Posted July 29th, 2013 11:00
Hi cruisetown,
I referred to the “Multi-Display” option in System Setup (BIOS). Power on/restart the computer and then press to enter System Setup. If you have trouble entering System Setup using this key, press when the keyboard LEDs first flash. Click the + sign before “Video”. Click “Multi-Display” and then check “Enable Multi-Display”.
cruisetown
1 Rookie
•
19 Posts
2524
0
Posted July 29th, 2013 22:00
I'm not able to see this option. I only get a choice to choose between Auto or Intel Graphics. in the video section of the BIOS
Dell-Zohaib R
4 Apprentice
•
953 Posts
2524
0
Posted July 31st, 2013 06:00
cruisetown
1 Rookie
•
19 Posts
2525
0
Posted August 2nd, 2013 03:00
Hi I cant get a screenshot but for the Video Section, I dont get a "Multi Display" subsection at all. What I do get is a subsection named "Primary Display" and in it there are 2 options: Auto and Intel Graphics. This applies to BIOS A13 and A14.
Dell-Zohaib R
4 Apprentice
•
953 Posts
2525
0
Posted August 4th, 2013 06:00
Hi cruisetown,
I request you to private message me the service tag of the system, registered owners name, address, and primary/alternate contact numbers.
To private message, click my user name and click Start conversation.
I would do my best to assist you further.
Awaiting your response!
DellCommunity1
2 Posts
2525
0
Posted August 6th, 2013 12:00
Yes, every single 9010 here I have tried to put A14 onto does this.
Either using a Dport to DVI or going back to A13 is the only way I have found araound it.
DellCommunity1
2 Posts
689
0
Posted September 5th, 2013 07:00
I was thinking that the "Multi Display" option only shows up if you have the Nvidia or ATI video card along with the onboard Intel HD present. If you only have the onboard Intel HD, then no Multi Display option shows or is changeable.

Dell-Zohaib R
4 Apprentice
•
953 Posts
2524
0
Posted July 29th, 2013 09:00
Hi cruisetown,
Thank you for bringing this to our notice. Just to make sure, did you enable “Multi-Display” after updating the BIOS?