UNSOLVED

zimmzimm

updated

19 years ago

Z

zimmzimm

31 Posts

0

8587

May 28th, 2007 22:00

Dual Monitor Video Card Upgrade Suggestions?

I'm looking to upgrade my current 4550 dimension Graphics Card with one that can support a Lacie Blue III and a Acer lcd.  I would like to use it as an contiuous desktop while using photoshop so I can place my tools on the LCD screen while working on the lacie.  I currently have a RAGE 128 PRO Ultra GL AGP. I bought the system about 4 years ago and it's running BIOS5 with a gb of ram.  Any suggestions for cards?  Can I use a PCI card, or does it have to be AGP?  Can I run dual monitors with my current system?
Thank   


  • kdmphx

    322 Posts

    291

    0

    Posted May 29th, 2007 14:00

    Does your Rage 128 card have two outputs? If not, you need an AGP card with 2. Check the inputs to your monitors. Do they take DVI or VGA or either? Many  cards with two outputs, but several varieties in this genre. Some have 2 DVI, some have 2 VGA, some have one each, some come with DVI to VGA adapters as an add on. You just have to match what you need to what you have. You can spend a little or a lot. The best AGP card that will work with your 250W PSU is the 7600GT. You can see the various outputs available here...
     
  • kdmphx

    322 Posts

    291

    0

    Posted May 29th, 2007 15:00

    What you are looking at is a really low end card. 64mb on board memory is very weak. It says it has dual monitor output and it shows at least 1 DVI so I imagine it will work for you. If it has 2 DVI, you'll need a DVI/VGA adapter, which is probably included. You'll have a card that will give you dual output, but again, this looks to be a VERY weak card.  This is a card from 2001/2002. Remember, you usually get what you pay for.
     
    You have a 4x/2x 1.5v system. From what I can see, this card is 4x AGP. So electrically, it should be okay.


    Message Edited by kdmphx on 05-29-2007 11:56 AM
  • Rorsach

    510 Posts

    291

    0

    Posted May 29th, 2007 15:00

    A 2x 3.3V card in a 1.5V port can burn the motherboard, so you'll want to know for sure before proceding.  Check the card you are considering to see if it is 2x 1.5 or 2x 3.3, and also check your documentation to find out what sort of port you have.
  • zimmzimm

    31 Posts

    291

    0

    Posted May 29th, 2007 15:00

    Well I know I need a VGA and DVI (I'll be using a lacie CRT and an Acer LCD).  I'm looking at getting this card on ebay...
    LINK  It's cheap and has both output's and shouldn't be a problem for my PSU (right?).  I'm not sure if it matters that it's 2x?  I'm not really sure what my current system is (2x/4x or 4x/8x)
     
     
  • kdmphx

    322 Posts

    291

    0

    Posted May 29th, 2007 16:00

    If you're building a new system, you'll be using a PCI-e card. A different animal from what you can put in your present PC.
     
    Since you're using an ATI card now, just go to Newegg and try searching for an ATI, AGP card. I'm sure you can find what you need for less than $50.
     




    Message Edited by kdmphx on 05-31-2007 09:35 AM
  • zimmzimm

    31 Posts

    291

    0

    Posted May 29th, 2007 16:00

    Thanks for the replies.  Basically it's a temp thing.  I'm looking to try and build my own core 2 system this summer and I would be using a PCI card so I don't think I could get a card now that I could pass on down to that build.  Any suggestions for a cheapie get the job done card?