UNSOLVED

Stephen41

updated

20 years ago

S

Stephen41

4 Posts

0

15197

August 15th, 2006 21:00

Dimension 4600 CPU Fan

Dell tell me that my CPU fan needs replacing. According to the arrow on the side of the fan, the air is extracted from the computer as opposed to being blown onto the components. It is connected to the system board with a three pin plug.

The current fan is a jmc-datech 12v, 0.85a, 4000 rpm, 45db, 92mm, 83.1 CFM. It is 92mm x 92mm x 38mm. Can anyone suggest a replacement product and where can I get one from in the UK? I don't really want to get one from Dell as they will charge me a fortune no doubt. The person I have dealt with at Dell won't even give me a price and has asked me to call an 0870 number, which I am reluctant to do as I will no doubt be on hold for ages. Can I just use any old 92mm case fan? I can't find one that gets anywhere near 83.1 CFM though. Is this going to cause an overheating problem?
 
The existing fan is about three years old and it no longer spins at all. I also get a Fan failure message upon startup and I have in the past encountered a shutdown due to thermal event error. Although the PC still boots up OK after pressing F1, I am no longer using the PC until I replace the fan.
 
Does anyone know how much Dell will sting me for a replacement OEM fan? I just need the fan itself and no shroud.
  • Manitalis

    3 Posts

    302

    0

    Posted August 15th, 2006 22:00

    I'm actually trying to remove the processor from the heatsink for use in another motherboard. What's the strategy for this?
  • jrwou1

    244 Posts

    302

    0

    Posted August 15th, 2006 22:00

    Don't know how much Dell charges, but you'll need to replace it with a Dell oem fan. You can get one from here:

    http://www.centrix-intl.com/details.asp?productid=809

    You can also do a search on eBay. The same fan is used in the 2350, 2400, 3000, & 4700., so that might aid in your search aswell.

    If you try an aftermarket fan you'll still get a "Fan Failure Message" since Dell uses a proprietary fan.

    Message Edited by jrwou1 on 08-15-200606:14 PM

  • coyley1

    15 Posts

    302

    0

    Posted August 17th, 2006 12:00

    Hi,

    I have a Dimension 8400 and when I switch on the processor fan runs at full speed and sounds like an aeroplane about to take off.

    The fan just runs and the system does not boot up. I called to Dell technical support who told me that the fan needs replacing.

    I question this as the fan is running but seems out of control. Anyway I Ordered one for £58 and it was sent the next day today Aug 17th. I fitted the new fan and lo and behold it does the same thing just runs at full speed and the PC fails to boot.

    I will be getting back to Dell Support but wondered if any of you real experts can point me in the right direction. Is it a Motherboard problem. (PC is only a year old) The service cover expired in April 2006.

    Thanks for taking time to read my problem, have a good day

    Mike.

      

  • jrwou1

    244 Posts

    302

    0

    Posted August 17th, 2006 13:00

    Coyley1,

    What color is your power button: solid green, blinking green, solid amber, blinking amber? And what color are the diagnostic lights(ABCD) on the back?

  • coyley1

    15 Posts

    302

    0

    Posted August 17th, 2006 14:00

    Hi jrwou1
     
    Stupidly I have probably posted my problem incorrectly I have re-posted it as a seperate posting under Dimension-general hardware Dimension 8400 failed to boot.
     
    Thank you for your time and sorry for the screw up.
     
    Mike.
  • coyley1

    15 Posts

    302

    0

    Posted August 17th, 2006 14:00

    Hi jrwou1,

    I have a Dimension 8400 THe power button is showing steady amber.

    No status lights (ABCD) are showing.

    Mike.