UNSOLVED

pmchugh

updated

15 years ago

P

pmchugh

2 Posts

0

10941

December 4th, 2011 13:00

Desktop will not Boot

So I've had this computer for two years with no problems, but now it just plain will not boot.

I performed a system restore to a previous date, then when I restarted I got the loading screen, and the Windows 7 graphic.  About halfway through the graphic, it returns to the Dell loading screen, then the screen went black and I receive a message saying the System failed to boot and I'm given two options: Perform Windows Diagnostic (recommended) and Start Windows Normally.

I first tested if ti was a software problem.  The Diagnostic says that there are no problems it can detect/fix, and attempting to start normally simply restarts the process.  I ran the more in-depth Diagnostic in the Boot Options menu, but it said everything was fine and the computer should be able to boot.

Next, I tested if it was a hardware problem.  I tried starting again after removing all peripherals (including keyboard, mouse, any CDs/DVDs in the optic drive, and the Graphics Card I installed over the summer).  Attempting to boot had the same result.  I then tried disconnecting and resetting the power source, the memory, the hard drive, and the optic drive; the result was still the same.

I can't find any indication of the exact model of the desktop, but the service tag is <ADMIN NOTE: Service tag removed per privacy policy> and it's running Windows 7.

What is the problem and how do I fix it (if I can)?

  • osprey4

    6 Operator

    •

    34230 Posts

    495

    0

    Posted December 4th, 2011 13:00

    Hi pmmchugh,

    The model, based on your service tag which you are not supposed to post, is an Inspiron 545s.

    I've got a link below to the Dell diagnostics. Run that first to see if your hardware checks out, but use your Dell drivers and utilities disc, not your hard drive, just in case you have a hard drive problem.

  • pmchugh

    2 Posts

    495

    0

    Posted December 5th, 2011 11:00

    "Error Code: 4400:011A

    Msg: SCSI_DISK_GENERIC-_COMPACT_FLASH - Target not ready"

    I actually have an error code now, but I can't seem to find what it means.  Should I assume it's the hard drive?

  • 495

    1

    Posted December 6th, 2011 12:00

    If the Inspiron 545s has a SCSI drive I think the diags have found a hardware issue.

    Dell was able to isolate another customers issue that sounds the same on another forum. It concerned the same error codes and by isolating the box they were able to get the computer to boot from the repair disk and get the user up and running via recovery. All is up and functioning according to the other user forum.

  • shesagordie

    12 Elder

    •

    46017 Posts

    495

    0

    Posted December 6th, 2011 13:00

    "Error Code: 4400:011A

    Msg: SCSI_DISK_GENERIC-_COMPACT_FLASH - Target not ready"

    I actually have an error code now, but I can't seem to find what it means.  Should I assume it's the hard drive?

     
    pmchugh
     
    If you have a memory card reader installed, try the following:-
     
    ERROR CODE 4400:011A SCSI can be caused by having no SD memory card in the card reader.
     
    Try inserting an SD card and retry the test.
     
    Bev.