UNSOLVED

Benjerama

updated

20 years ago

B

Benjerama

1 Message

0

3341

April 2nd, 2006 00:00

Dell XPS 400 video production help

I recently bought a Canon ZR 10 and i was going to use it to take my recorded footage and edit it with my XPS 400. I have searched over alot of websites and have found that there is no evidence that this XPS model has a firewire port. It really bothered me because i am not sure if there is any other way to connect my camera to the computer. I would appreciate it if anyone could show me where the port for the firewire is located on a Dell XPS 400 model, because i ordered my computer off of ebay so there may have been a firewire port installed without me knowing it. So if a solution can be found as to how i can get my footage from my camera to computer and as to where the firewire port would be located, it would be much appreciated, thanx!

Ben
  • Jacksmyname

    69 Posts

    145

    0

    Posted April 2nd, 2006 12:00

    There are only two places that I know of where you'll find a firewire port on the XPS400:

    On the front of the case next to the USB ports, or on the back, either a seperate port or as a port on the sound card.

    When I ordered my XPS400, I inadvertantly ordered it with onboard audio instead of a sound card. So, I ordered the Soundblaster Audigy2 ZS card from Dell and installed it. That card has a firewire port on it.

    If your computer has that audio card, it has (or should have) the port.

    Jack

  • contrvlr

    1359 Posts

    145

    0

    Posted November 12th, 2006 03:00

    There are 2 types of firewire connectors, my JVC camcorder has a mini 1394 connector that plugs into my laptop, but will not work with the larger port on my Audigy card. If you have the larger type connector, you can call Dell Spare Parts 800-357-3355
    and see if they have the 2 port firewire card that installs in a pci slot. One of these came in a D4700 that I had.
     
    Edit: I must be to drunk as I just saw the date on this post

    Message Edited by contrvlr on 11-11-200611:26 PM

  • jday

    101 Posts

    145

    0

    Posted November 12th, 2006 12:00

    The XPS 400 didn't come standard with a firewire port.  It did offer an optional front panel one in the configuration.  So, if you didn't configure it specifically with it, then you probably don't have one.  However, if you have an internal slot open you can install one in the back of the computer or if you didn't fill the bay in the front panel, you can buy the optional one from Dell.