
UNSOLVED
GA
Gerry Atrick
23 Posts
0
12963
May 11th, 2008 09:00
Dell Wireless 1450 Dual-band (802.11a/b/g) USB2.0 Adapter
Help please. I have a link to DELL USB 2.0 WLAN Card UTILIY but when I double click it no longer opens. Any ideas how to fix this please? I can of course still access the Internet via the wireless network, but I need the Utility to be able to change security settings etc.
Gerry
Responses (5)
Solutions (0)
Gerry Atrick
23 Posts
372
0
Posted May 12th, 2008 05:00
Many thanks for your reply. I have no problem opening the HomeHub page and can cerrtainly adjust the security settings there- but it is also necessary to configure the wireless adapter also and for that I need access through the Utility.
Gerry
Message Edited by Gerry Atrick on 05-12-2008 01:23 AMGerry Atrick
23 Posts
372
0
Posted May 12th, 2008 15:00
Many thanks again for your replies. All seems to be well again - I don't know what the problem was, but I have made a note of your advice and will try it should there be a recurrence of the problem.
I appreciate your help.
Gerry
oh yes i forgot to tell you that once you have change the security settings, you have to to remove the old profile and add the profile back with the new security settings. you might have to open your utility to remove and add the profile back with the new security settings. profile is jsut the same as your network name or SSID.

ellomei
70 Posts
372
0
Posted May 11th, 2008 19:00
try the following:
1. open run, type cmd, press ok
2. on the black window, type ipconfig, press enter
3. look for the default gateway, take note of it. default gateway looks like this - 192.168.0.1/192.168.1.1
4. open you IE / firefox browser, type the default gateway in the address bar and press enter.
5. now you are on your router page where you can change the security settings. the WLAN card util does not have the security settings.
hope this helps....