
UNSOLVED
M
MsMorrisine
14 Posts
0
2990
April 5th, 2016 16:00
Changing Power Supply PSU on i3847 4925 - Have Standards Changed?
I'm lost.
The old days with fewer iterations of everything are gone.
I could change a power supply in a Dell even when I had to mod the case.
Now, I'm not even sure which PSU will work, will have the right cables, and will fit inside the desktop case.
Now, before you hit reply, (especially for SpeedStep), and post Corsair CS750M please hear me out.
I've read many threads with various power and Amp requirements:
3.3/5v rail needs 150W
15 to 20W (3 or 4A) on the 5Vsb
9W on the -12V
and the power calculator I used indicates about 600W is needed fully loaded.
Well, I go straight for the Corsair CS750M, and what do I see in the specs on the corsair site for the CS750M?
130W on the 3.3/5v
3A/15W on the 5Vsb
9W on the -12v
luckily the dimensions aren't changed. Still 140mm / 5.5" long
So, I am thinking either the dell Motherboard Specs have changed (?) or the power supply specs have changed. (???)
which? I have no idea. I am lost.
So, I go looking for PSU that delivers 150W on the 3.3/5v, at least 15W on the 5Vsb and at least 9W on the -12V.
I see there is a EVGA PSU saying it is ready for 4th gen core - 120-g1-0750-XR, but I'm not sure about the dimensions (7.1inches long or 180mm compared to the 140mm/5.5" of the CS750M) and the 4 pin is not a 4 pin. It is a 2x split 4pin+4pin.
Also, there is a Thermaltake TPG-750M - with similar specs
150W on the 3.3/5v
15W on the 5Vsb
9W on the -12V
but it is also 7.1" long and has a single split 4pin+4pin connector and for the rest? At this point, I give up. I also give up because these have been the only 2 750W PSU that had 150W on the 3.3/5v and I checked a lot of brands.
So I ask:
1) Why doesn't dell publish their bleeping specs.
and the question I really hope to have answered:
2) It seems like the corsair CS750M won't do for the i3847 as described in past post unless
== a) the specs from dell changed? Does the CS750M as spec-ed on the corsair site still supply everything a newly upgraded i3847 needs power supply wise on all the rails, and have the proper cables?
or
== b) worse, the specs from Corsair changed, and I need to find a suitable and fit-able PSU of at least 600W. so, what PSU would work and fit and have workable cables? (the only two with 150W/750W are 7.1" long!) ((I could find nothing under 750W that had 150W on the 3.3/5v))
Responses (6)
Solutions (0)
MsMorrisine
14 Posts
1356
0
Posted June 4th, 2016 18:00
The GTX970 I'm looking at lists a recommended PSU of 400W and it needs an 8pin power connector.
And I've already upgraded the RAM and am going to swap the HDD to disk 2 and install a SSD as disk one.
So there is more power needed from that, too.
MsMorrisine
14 Posts
1356
0
Posted June 4th, 2016 18:00
Ok.
I finally have cracked the case to get the deal on the internals and the stock power supply
I have a dell inspiron i3847-4925
It's build date was November 2015
It has a 300W Lite On power Supply and an Core i3-4160 CPU. There are still only slots for 2 DIMMS and a single PCIe 16x slot with 2 1x slots besides.
I note the distance from the back of the case to the wires protruding from the DVD drive leaves about 8 inches for a very tight fit or 7.5 inches for a less tight fit on a different power supply.
The stock power supply does not have the old 4 pin Molex connectors, but have all newer 15 pin flat power connectors. The stock wiring is not modular (removable), but is built into the PSU instead.
On the motherboard there is only a 4pin ATX power input (not 4x2 a/k/a 8pin) and the 24 pin input
The on/off power jack has been moved south on the motherboard and is near the lower right behind the SATA jacks. There is a 14pin mount on the motherboard behind the 16x PCIe slot on the extreme right of the motherboard, but there is no jack soldered onto the 14pin placement.
Due to the Disk Drive bays being riveted to the case, it would take some creativity to move them and re-mount them somewhere and some way else. Considering the drive bay location, there is now only about 10 inches from the back of the case to the drive bays for room to install a video card.Unfortunately there is no table on the Power Supply. Below are the specs as listed on the stock PSU label.
Lite-On Power supply 300W
Dell P/N G9MTY
P/N PS-6301-06D1
Model No: L300NM-01
Output
+5V --- 13A Max
+5Vaux --- 2A Max
-12V --- 0.3A Max
+12VA --- 17A Max
+12VB --- 9A Max
+3.3V --- 10A Max
The Maximum continuous combined output power (5V & 3.3V excluding the 5Vaux) is 90W
+12V rails (+12VA and 12VB) will not exceed 216W
And that is it.
By the way, I'm planning to change the CPU from the Core i3-4160 to the Core i7-4790k
and the video card to a GTX960 or GTX970 with the proper length.
what changes to the power supply need to happen to ensure the PSU can handle both the new CPU and the new video card. Which rails do each use? I am not sure if the CPU works off the 90W on the stock one or off the other rails of 216W and similarly for the video card.
MsMorrisine
14 Posts
1356
0
Posted June 19th, 2016 01:00
It's interesting you show the EPS 2.92 specs in the table and it indicates 170W on the 3.3V/5V combined loading.
Yet, the CS750M still shows 130 maximum combined wattage for the 3.3/5V.
I think the answer is that the standards have changed, but the CS750M never had a maximum combined wattage of 150W on the 3.3V/5V as older posts in these forums have referenced the 130W currently shown.
Yes, I would at least consider matching the wattage on the stock power supply, but then there is the efficiency to consider. Is the reduced wattage due to higher efficiency? I'm not sure.
But, as far as power requirements for a Nov 2015 built Inspiron i3847, their 300W power supply has gone DOWN on the 3.3V/5V combined to 90W. Even the sum of the 3.3V/5V Wattages are less than 100, at 98W.
So, Dell's PSU specs have changed, too. They went down. So, that is also part of the answer.
So, I figure if I at least match that or beat it with another recent generation PSU, then I'll be fine.
I think a CS550M or CS650M will do, but I won't find out because I am getting a GTX970 and other upgrades and the calculators are showing 600W -- and I know where I can get .. you guessed it ... a CS750M for a deal. In the end, a CS750M will go in. If I could get the same deal on a CS650M, I'd definitely be putting that one in.
Thanks for the info.
The higher wattage on +5vsb and 3.3v/5v combined goes UP as the wattage goes up and the ram slots are 4 or more. The 460W and 525W and 875W dell power supplies DO NOT reflect your 90W assertion. They go up to over 30 amps and 225W combined on the 3.3v/5v Rails. This is the power supply in the Alienware Aurora and Precision Workstations that take 2 cards Crossfire W299G. some say AX760 IS FINE and others say its not. The other thing that seems to be ignored is that Video cards and hard drives etc use more than just 12v rail. As you add things they use power from multiple busses unless the other voltages are run via conversion on the motherboard as they are in the Precision T1700 and Optiplex 3020 etc.
PCI-Express 16x PinOutPin Side B Connector Side A Connector # name Description name Description 1 +12v +12 volt power PRSNT#1 Hot plug presence detect 2 +12v +12 volt power +12v +12 volt power 3 +12v +12 volt power +12v +12 volt power 4 GND Ground GND Ground 5 SMCLK SMBus clock JTAG2 TCK 6 SMDAT SMBus data JTAG3 TDI 7 GND Ground JTAG4 TDO 8 +3.3v +3.3 volt power JTAG5 TMS 9 JTAG1 +TRST# +3.3v +3.3 volt power 10 3.3Vaux 3.3v volt power +3.3v +3.3 volt power 11 WAKE# Link Reactivation PWRGD Power Good Mechanical Key 12 RSVD Reserved GND Ground 13 GND Ground REFCLK+ Reference Clock
Differential pair14 HSOp(0) Transmitter Lane 0,
Differential pairREFCLK- 15 HSOn(0) GND Ground 16 GND Ground HSIp(0) Receiver Lane 0,
Differential pair17 PRSNT#2 Hotplug detect HSIn(0) 18 GND Ground GND Ground 19 HSOp(1) Transmitter Lane 1,
Differential pairRSVD Reserved 20 HSOn(1) GND Ground 21 GND Ground HSIp(1) Receiver Lane 1,
Differential pair22 GND Ground HSIn(1) 23 HSOp(2) Transmitter Lane 2,
Differential pairGND Ground 24 HSOn(2) GND Ground 25 GND Ground HSIp(2) Receiver Lane 2,
Differential pair26 GND Ground HSIn(2) 27 HSOp(3) Transmitter Lane 3,
Differential pairGND Ground 28 HSOn(3) GND Ground 29 GND Ground HSIp(3) Receiver Lane 3,
Differential pair30 RSVD Reserved HSIn(3) 31 PRSNT#2 Hot plug detect GND Ground 32 GND Ground RSVD Reserved 33 HSOp(4) Transmitter Lane 4,
Differential pairRSVD Reserved 34 HSOn(4) GND Ground 35 GND Ground HSIp(4) Receiver Lane 4,
Differential pair36 GND Ground HSIn(4) 37 HSOp(5) Transmitter Lane 5,
Differential pairGND Ground 38 HSOn(5) GND Ground 39 GND Ground HSIp(5) Receiver Lane 5,
Differential pair40 GND Ground HSIn(5) 41 HSOp(6) Transmitter Lane 6,
Differential pairGND Ground 42 HSOn(6) GND Ground 43 GND Ground HSIp(6) Receiver Lane 6,
Differential pair44 GND Ground HSIn(6) 45 HSOp(7) Transmitter Lane 7,
Differential pairGND Ground 46 HSOn(7) GND Ground 47 GND Ground HSIp(7) Receiver Lane 7,
Differential pair48 PRSNT#2 Hot plug detect HSIn(7) 49 GND Ground GND Ground 50 HSOp(8) Transmitter Lane 8,
Differential pairRSVD Reserved 51 HSOn(8) GND Ground 52 GND Ground HSIp(8) Receiver Lane 8,
Differential pair53 GND Ground HSIn(8) 54 HSOp(9) Transmitter Lane 9,
Differential pairGND Ground 55 HSOn(9) GND Ground 56 GND Ground HSIp(9) Receiver Lane 9,
Differential pair57 GND Ground HSIn(9) 58 HSOp(10) Transmitter Lane 10,
Differential pairGND Ground 59 HSOn(10) GND Ground 60 GND Ground HSIp(10) Receiver Lane 10,
Differential pair61 GND Ground HSIn(10) 62 HSOp(11) Transmitter Lane 11,
Differential pairGND Ground 63 HSOn(11) GND Ground 64 GND Ground HSIp(11) Receiver Lane 11,
Differential pair65 GND Ground HSIn(11) 66 HSOp(12) Transmitter Lane 12,
Differential pairGND Ground 67 HSOn(12) GND Ground 68 GND Ground HSIp(12) Receiver Lane 12,
Differential pair69 GND Ground HSIn(12) 70 HSOp(13) Transmitter Lane 13,
Differential pairGND Ground 71 HSOn(13) GND Ground 72 GND Ground HSIp(13) Receiver Lane 13,
Differential pair73 GND Ground HSIn(13) 74 HSOp(14) Transmitter Lane 14,
Differential pairGND Ground 75 HSOn(14) GND Ground 76 GND Ground HSIp(14) Receiver Lane 14,
Differential pair77 GND Ground HSIn(14) 78 HSOp(15) Transmitter Lane 15,
Differential pairGND Ground 79 HSOn(15) GND Ground 80 GND Ground HSIp(15) Receiver Lane 15,
Differential pair81 PRSNT#2 Hot plug present detect HSIn(15) 82 RSVD#2 Hot Plug Detect GND Ground IF you go up to 900W and more the 3.3v and 5v maximums climb to 25 or even 30 AMPS. 5V @ 30 AMPS is 150W in and of itself with 225W combined on the rails.
An Antec 550W the current goes UP to 44 AMPS (24 + 20) and 179W combined on the 3.3v/5v rails.
The 460W units are stock for the XPS 8500 8700 8900.
w299g
Corsair AX760 Digital ATX Power Supply AC Input Rating DC Output Rating AC Input: 100V - 240V DC Output +3.3V +5V +12V -12V +5Vsb Current: 9.5 - 4.5A Max Load 25A 25A 63A 0.5A 3.0A Frequency: 50Hz - 60Hz Maximum Combined Wattage 125W 756W 6W 15W Total Power: 760W ************************************************************************************************************************
EVGA SUPER NOVA B1 is listed as working but being a very tight fit.
80mm (H) x 150mm (W) x 165mm (L) P/N: 110-B1-0750-VR
NOTE that the B2 DOES NOT WORK Note the 150W on the 3.3v/5v rails for the EVGA SUPER NOVA NEX B1
AC Input 100 - 240 VAC, 10-5A, 50 - 60 Hz Rail +3.3V +5V +12V1 / +12V2 / +12V3 / +12V4 +5Vsb -12V Max Output 25A 25A 61A (4 +12V Rails) 3A 0.8A 61A 150W 732W 15W 9.6W Total 750W @ +50C MsMorrisine
14 Posts
1356
0
Posted July 9th, 2016 16:00
We can discuss the different power supply requirements for high end gaming, but the topic is regarding the i3847 low ender.
Of course there are different power supply standards for high end gaming.
The base question of this topic is if the standards have changed or the power supplies have changed that are recommended upgrades for the Inspiron 3847.
I posted what my november 2015 build i3847 came As Factory Built. It was a 300W Lite-On Power supply with on 90W on the +5V/+3.3V rails. And I noted that, in fact, the maximum designed wattage obtained by adding the max wattage of the +5V rail and the max wattage of the +3.3V rail added up to only 98W total. So, the assertion that only 150W or better on the +5V/+3.3V rails for a PSU upgrade is an old one. I assume it is true for older build i3847 as I have seen your photo of the stock PSU label and it was 150W.
However, I have inspected the current build PSU and can definitively say it is only 90W rated there.
Here is a photo I took today of it.
I respect your knowledge, but times and power supplies have changed.
I think future questions about i3847 PSU upgrades need to be returned with a "what was the stock build PSU output in yours" question.
And here is what the current (and past) specs of the oft recommended upgrade PSU - the Corsair CS750M. Note, the Wattage on the +5V/+3.3V is listed as max 130W, not 150W.
And finally here is the motherboard that came in the November 2015 build i3847
Note on the left it is ATX 4pin only. Any PSU upgrades need 4+4 pin, separable CPU power supply cables.
The yellow arrow on the left are the SATA drive connectors. the right most two, closest the arrows, are for "HDD", and the two to the left are for the ODD. I note my build came with the DVD drive in the second jack instead of the first like the HDD was. Also note the cables are not stock cables. I added a SSD and changed out the cables in the computer.
The upper right green arrow is a possible problem for those looking to go loco on a video card. The arrow is pointing to the jack for the wiring from the front of the computer. If one can find a 10.4" or less GPU but is multi fan, then it will likely be a double slot card. I am not sure if that jack and wiring harness will prevent a 10.4" double slot video card from fitting or not. It might. There is a place for a different jack on the end of the motherboard out where a single slot card might go, however there is no jack soldered in place there, so that beige area with multiple holes between the screw on its left and the greeen arrowed wiring harness/jack on the right is not going to be any issue at all.The mobo connector is a 24 pin.
I will also note a mystery jumper on the motherboard. I have no idea what it is for. It is the right red arrow and is located just beside the SATA connectors. There are separate jumpers marked on the mobo for RTCRST (real-time clock reset) to reset the BIOS settings (CMOS clear) and PSWD to reset the BIOS password. The jumper in question is not marked.

speedstep
11 Legend
•
46969 Posts
1356
0
Posted April 11th, 2016 12:00
1995 ATX 12v 70 percent efficient
vs 2012 EPS 12v 2.92 80 to 95 percent efficient.
Note the Higher Spec for larger supplies with 4 dimms or more is 6A on the +5vsb. Higher spec for the 3.3v /5v rails is 170W.