UNSOLVED

Havok_

updated

20 years ago

H

Havok_

75 Posts

0

30086

February 7th, 2007 14:00

Buying a low end XPS710... easy to upgrade?

Hey everyone.  I'm looking at getting an extremely low end XPS 710 w/ Red Chassis and will be upgrading it to meet more specific specs.
 
I won't go into the details of why I'm going this route, but it is less expensive for me.
 
If I buy the system with teh C2D E6300 can I just pop in an E6700 and easily reuse the existing XPS cooling?  Will I have to do anything funny in the BIOS?
 
Other than that, I intend to add a Dell 160GB 10K drive and 4GB of Crucial memory for the 710.
 
Just want to make sure there is only one 710 BIOS and that it supports all options and that another processor is an easy swap out.
 
Thanks for any help you can provide.
 
-Rick
  • Havok_

    75 Posts

    617

    0

    Posted February 7th, 2007 14:00

    Actually, you address another question I was concerned with...
     
    So in the 710 the BIOS is "aware" of the processor and selective of which you can overclock and which you cannot?  So using anything less than a QX6700 or X6800 will cause the BIOS to lock out the overclock option?  But switch to the QX6700 or X6800 and you'll be able to OC? 
     
    Want to make sure I don't lose out on that option.
     
    What about OC via nTune?
     
    Thanks!
     
     
  • pointguard1122

    1891 Posts

    617

    0

    Posted February 7th, 2007 14:00



    Havok_ wrote:
    Hey everyone.  I'm looking at getting an extremely low end XPS 710 w/ Red Chassis and will be upgrading it to meet more specific specs.
     
    I won't go into the details of why I'm going this route, but it is less expensive for me.
     
    If I buy the system with teh C2D E6300 can I just pop in an E6700 and easily reuse the existing XPS cooling?  Will I have to do anything funny in the BIOS?
     
    Other than that, I intend to add a Dell 160GB 10K drive and 4GB of Crucial memory for the 710.
     
    Just want to make sure there is only one 710 BIOS and that it supports all options and that another processor is an easy swap out.
     
    Thanks for any help you can provide.
     
    -Rick


    That is probably the best way to buy a XPS.  Dell marks up the price on upgrades higher than retail.  You can easily swap out the processor with no issues.  The hard drive and Ram will also easily swap.  Make sure you Ram is 667 and you really only need 2 GB unless you are planning to run x64 OS.  ANother thing to think about, if you are considering upgrading to the H2C cooling system, you might want to consider a quadcore processor or the x6800.  Those are the only processors that you can BIOS OC.  If you don't care to OC, the E6700 will work just fine.  You might want to look at Dell Outlet to save a few more bucks.
  • jsrder

    903 Posts

    617

    0

    Posted February 7th, 2007 14:00

    You are correct that the BIOS only allows you to adjust the "clock speed multiplier" on the X6800 and QX6700 (because those are the ones that Intel "unlocks" ) .
     
    The other processors can be overclocked by using nTune to adjust the FSB.


    Message Edited by jsrder on 02-07-2007 10:43 AM
  • pointguard1122

    1891 Posts

    617

    0

    Posted February 7th, 2007 15:00

    Correct.  You can add it at any time.  Even without a X6800 or QX6700, it should give you a little more OCing via ntune.  The only real problem is the 590 chipset is a very poor OCer via FSB increasing. 
  • Havok_

    75 Posts

    617

    0

    Posted February 7th, 2007 15:00

    ok..  hopefully last question...
     
    Does the H2C option have ANYthing to do with the BIOS or is it simply the cooler unit and Dell "supported" overclocking?
     
    i.e.  Could that be added later?
  • Bubbadog123

    17 Posts

    617

    0

    Posted February 7th, 2007 18:00

    Take a look at the following link:
     
     
     
    Seems he oc'ed an E6700
  • jsrder

    903 Posts

    617

    0

    Posted February 7th, 2007 19:00



    Bubbadog123 wrote:
    Take a look at the following link:
     
     
     
    Seems he oc'ed an E6700


    Just to clarify, because that's what Havok was asking about, the images you link to reflect the overclocking done via nTune and adjusting the FSB.
     
    This is different than using the BIOS to directly change the clock speed multiplier.  Which is better is up to personal preference, some prefer changing the clock speed multiplier via the BIOS as this is a hard fixed adjustment and is perceived as more stable than nTune SW overclocking. 
  • Havok_

    75 Posts

    617

    0

    Posted February 7th, 2007 19:00

    Thanks everyone. 
     
    jsrder, you are correct.  I think changing the multiplier is preferred as you aren't attempting to OC the memory also.  Since Dell is using 667MHz memory, trying to move the FSB up may not generate favorable results.  Of course it may be just fine...
     
     
  • Havok_

    75 Posts

    617

    0

    Posted February 8th, 2007 00:00

    Hey everyone!  Thanks again for the quick answers...  I ended up NOT buying the low end system and found a decent deal in the Outlet instead...
     
    XPS710 w/1Kw
    QX6700
    2GB memory
    2x 160GB 10K Raptors
    DVD+/-RW
    Dual GeForce 7900GTX SLi
    30" Dell Monitor
     
    Can't wait for it to get here...
     
     
  • jsrder

    903 Posts

    327

    0

    Posted February 8th, 2007 01:00

    Glad we could help answer your questions - the best thing is that you get the information you need to make an informed decision on what you're buying (specs and features).
     
    Congrats on saving some bucks by going the Outlet, I think that's the only way to go.  Come on back to the forum when you get your system and have more questions (sometimes it's better to come here before you call Support because then you'll know if the Support Rep is knowledgable or not).  This really is a community here (because Dell isn't very involved) and we all help each other out by sharing knowledge and experience.