
UNSOLVED
D
DarrenM343
70 Posts
0
10807
September 21st, 2008 17:00
Anyone got an Ati 4870x2 working in XPS 720
Hi,
Has anyone managed to get an Ati 4870x2 working in an XPS 720?
I have an XPS710 converted to 720 (with 750watt power supply). I`ve used a 9800GX2 before in the machine by using the supplied 6 to 8 pin connector. Ati don`t ship this connector with the 4870x2 but instead have a 4pin(molex?) to 8 pin adapter. You need two 4pin molex to make the 8 pin. So what I did was this:
1. I put in the Ati 4870x2.
2. I plugged in one Dell 6 pin connector to the card.
3. I used the Ati supplied molex to 8 pin adapter. Because the cable wasn`t long enough I relocated the DVD drive down two positions which then allowed me to connect the adapter to the two molex connectors and then plugged it into the Ati card.
4. I try to boot the machine. I can hear a loud fan but the display goes into sleep mode.
I can`t imagine the 4870 needing too much more power than the GX2, why isn`t this a straight forward swap?
Does the 1000watt supply have an 8 pin connector as standard, can I get one? Or am I better off modernising the machine itself by replacing it completely (mobo, case, power - everything else I can put into a new machine.
Responses (6)
Solutions (0)
I have the XPS 720 and bought the Sapphire version of the HD4870 x2.
I actually had to disconnect one of my optical drives to be able to supply the graphics card with enough juice. Probably not because of power, but because I could not reach the graphics card otherwise. I had the 8800GTX before, and I could only use one of those connectors, since the adapter that came with thcard didn´t support the ones originally fitted to the 8800.
shdbcamping1
475 Posts
628
0
Posted September 23rd, 2008 15:00
Swede74,
If it is only a real estate problem, ie. adaptor problem get one at a local electronics store. There is about every combination available. Check your PSU specs and the cards. the right adapter should get you rolling.
Sean
DarrenM343
70 Posts
628
0
Posted September 23rd, 2008 19:00
Well I can`t get it to work in my machine. I`ve tried the 'two molex to 8 pin connector' that came with the card and I`ve just tried a '6 pin to 8 pin adapter' and no joy. Basically the card works (the fan spins up) but the fan doesn`t come back down to idle and there is no display on my monitor - not even the bios is displayed.
Under the card there are three or four red lights under the 8pin connector, is this normal?

Davet50
6 Operator
•
14442 Posts
628
0
Posted September 21st, 2008 17:00
You should have a spare 6 pin connector in the machine. Get a 6 pin to 8 pin convertor
And no the 1kw only has 6 pin. Even the 730 ps has 6 pin connectors.
So if you want 8 pins you will need another system