
UNSOLVED
add a 2nd HD to a Dell T3400
It appears that the two slots for running Drives on the MB are taken up by the present HD and an optical drive.
If it is possible to do what I need , could a picture of the area for plugging in a 2nd HD on the MB be supplied?
Where would I get a SATA cable for this?
Thanks for any suggestions.
Responses (1)
Solutions (0)

Hanspuppa
799 Posts
750
0
Posted December 28th, 2008 13:00
Hello jack33, I found this information.
The Dell Precision T3400 supports up to four hard drives in the tower orientation and up to three hard drives in the desktop orientation for potential capacities of 4TB2 and 3.5TB2 respectively. With RAID 0, 1, 5 and 10 options, you can configure your storage to meet your needs, whether it's for storing huge files, backing them up, or helping to improve performance with data-striping.
Your system has the Intel X38 chipset. You can add another hard drive if you have an available place to install one.
You would need to enter the BIOS and locate the port that you connect the drive cable to, and enable that port.
Save your settings and exit. You can use any port that is not being used to connect the SATA cable to.
If you purchase a Retail Boxed hard drive, it should come with the SATA cable.
If you purchase an OEM (bare drive) you will need to purchase a SATA cable.
That can be acquired from the vendor that you purchase the hard drive from.
Hope this helps.